Read Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man11) Service Manual online
MX3500N AR-PF1 11 – 1
MX3500N
Service Manual
[11] AR-PF1
1. Unpacking
A. Parts included
2. Installation
A. Installation of the barcode font ROM PWB
1)
Turn OFF the main switch of the copier, and disconnect the
power plug of the copier from the power outlet.
power plug of the copier from the power outlet.
2)
Remove the screw, and remove the rear cabinet.
3)
Remove the connector and the screw, and remove the MFP
PWB shield plate upper.
PWB shield plate upper.
4)
Install the barcode font ROM PWB to the barcode connector.
* Check to confirm that the silver push lever extends out when
* Check to confirm that the silver push lever extends out when
the PWB is installed.
* The connector position is indicated by the silk print on the
PWB.
5)
Install the MFP PWB shield plate upper and connect the con-
nector.
nector.
6)
Install the rear cabinet.
7)
Insert the power plug of the copier into the power outlet. Turn
ON the power switch and perform the following procedures.
ON the power switch and perform the following procedures.
B. PCL expansion font list check
1)
PCL expansion font list check
Select the PCL expansion font list by the procedures described
in the printer test page in the system setup guide.
Check to confirm that the barcode font list is printed.
Select the PCL expansion font list by the procedures described
in the printer test page in the system setup guide.
Check to confirm that the barcode font list is printed.
No.
Packed part names
Quantity
1
CD-ROM
1
2
Operation Manual
1
AR-PF1 barcode font ROM PWB
1
2
1
2
1
2
BOOT
BARCODE
PCL/BUMON
PS KANJI
PROGRAM
FAX IMG EXT
1
2
1
2
Click on the first or last page to see other MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man11) service manuals if exist.