Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man5) Service Manual online
MX-4070N SIMULATION 6 – 8
66-22
Used to set the handset sound volume (Japan
model only)
model only)
66-29
Used to initialize the telephone book data
66-30
Used to display the TEL/LIU status change,
the display is highlighted by status change
the display is highlighted by status change
66-31
Used to set ON/OFF the port for output to
TEL/LIU
TEL/LIU
66-32
Used to check the fixed data received from
the line and to display the result
the line and to display the result
66-33
Used to execute detection of various signals
with the line connected and to display the
detection result. When a signal is detected the
display is highlighted
with the line connected and to display the
detection result. When a signal is detected the
display is highlighted
66-36
Used to check send and receive data from the
MODEM controller to the MFP controller or
the data line or the command line individually
MODEM controller to the MFP controller or
the data line or the command line individually
66-39
Used to check and change the destination
setting saved in EEPROM of the FAX BOX
setting saved in EEPROM of the FAX BOX
66-42
Used to rewrite the program to power control
installed in the FAX BOX
installed in the FAX BOX
66-43
Used to write the adjustment value into the
power control installed in the FAX BOX
power control installed in the FAX BOX
66-61
Used to display the image send-related soft
SW (151-250) on the LCD to allow changing
the soft SW while checking with the LCD
SW (151-250) on the LCD to allow changing
the soft SW while checking with the LCD
66-62
Used to import the FAX receive data into a
USB memory in PDF file type
USB memory in PDF file type
67-17
Printer reset
67-24
Printer color balance adjustment (Auto
adjustment)
adjustment)
6
67-25
Printer color balance adjustment (Manual
adjustment)
adjustment)
1-4
6
67-26
Used to set the target color balance of the
printer mode auto color balance adjustment
printer mode auto color balance adjustment
6
67-27
Used to set the service target of the printer
mode auto color balance adjustment
mode auto color balance adjustment
6
67-28
Used to set the default of the service target of
the printer mode auto color adjustment
the printer mode auto color adjustment
6
67-31
Used to clear the printer calibration value
67-33
Used to change the gamma of the printer
screen
screen
67-34
Used to set the density correction in the
printer high density section
printer high density section
67-36
Used to adjust the density in the low density
section
section
67-41
Used to set 2 color print
67-42
Used to set 2 color print color density
67-43
Used to adjust 2 color mode color balance
67-52
Used to set the default of the gamma of the
printer screen
printer screen
1-3
67-54
Printer color balance adjustment
1-3
Sim
No.
Easy Mode
In
st
a
lla
ti
o
n
Main
te
nance
Adjus
tm
e
nt and
Set
ti
ngs
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man5) service manuals if exist.