Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man5) Service Manual online
MX-4070N SIMULATION 6 – 7
51-1
Used to adjust the ON/OFF timing of the
secondary transport voltage
secondary transport voltage
51-2
Used to adjust the contact pressure
(deflection amount) on paper by the main unit
and the SPF resist roller
(deflection amount) on paper by the main unit
and the SPF resist roller
53-6
Used to adjust the detection level of the SPF
document width
document width
3
53-7
Used to adjust the SPF document size width
sensor
sensor
53-8
Used to adjust the document lead edge
reference and the SPF mode document scan
position
reference and the SPF mode document scan
position
3
53-9
SPF dirt detection setting
53-10
SPF dirt detection execution
55-1
Used to set the specification of the engine
control operations (SOFT SW)
control operations (SOFT SW)
55-2
Used to set the specifications of the scanner
control operation (SOFT SW)
control operation (SOFT SW)
55-3
Used to set the specifications of the controller
operation (SOFT SW)
operation (SOFT SW)
55-10
Used to set the special stamp text for Taiwan
56-1
Used to transport data between HDD - MFP
PWB SRAM/EEPROM
PWB SRAM/EEPROM
56-2
Used to backup the data in the EEPROM and
HDD to the USB memory
HDD to the USB memory
56-3
Used to backup the document filing data to
the USB memory
the USB memory
56-4
Used to backup the JOB log data to the USB
memory
memory
56-5
Used to import the SIM22-6 data to a USB
memory in the text format
memory in the text format
56-6
Used to output the JAM/trouble data
56-7
Used to export system log data to the USB
memory
memory
56-8
Used to perform ICC profile update
56-15
MFP EEPROM data restore
56-99
Used to export system log data to the USB
memory
memory
3-4
1-5
9-4
60-1
Used to check the memory operations (read/
write) of the SCU-MFP PWB
write) of the SCU-MFP PWB
61-1
Used to check the LSU polygon motor rotation
and laser detection
and laser detection
61-3
Used to set the laser power
61-4
Used to print the print image skew adjustment
pattern
pattern
61-11
Used to correct the laser power automatically
2-3
1-2
-3
61-12
Laser power manual correction
61-13
Used to clear the laser power correction value
2-3
1-3
61-14
Used to set the laser power correction
1-3
62-1
Used to format the HDD
62-2
Used to check read/write of the HDD (partial)
62-3
Used to check read/write of the HDD (all
areas)
areas)
62-6
Used to perform the self diagnostics of the
HDD
HDD
62-7
Used to print the HDD self diagnostics error
log
log
62-8
Used to format the HDD
62-10
Used to clear the job completion list data
62-11
Used to delete the document filing data
62-12
Used to set Enable/Disable of auto format in a
HDD trouble
HDD trouble
62-13
Used to format the HDD (Operation manual
watermark data only)
watermark data only)
62-14
Used to delete the document filing
management data
management data
62-20
Used to check the status display of HDD
Sim
No.
Easy Mode
In
st
a
lla
ti
o
n
Main
te
nance
Adjus
tm
e
nt and
Set
ti
ngs
63-1
Used to display the shading correction result
63-2
Used to perform shading
1-5
3
63-3
Used to perform scanner (CCD) color balance
and gamma auto adjustment
and gamma auto adjustment
1-5
2-3
3
63-4
Used to display the scanner test chart patch
density
density
63-5
Used to perform the scanner (CCD) color
balance and gamma default setting
balance and gamma default setting
2-3
3
63-7
Used to register the service target of the copy
mode auto color balance adjustment
mode auto color balance adjustment
5
63-8
Used to set the default of the service target of
the copy mode auto color balance adjustment
the copy mode auto color balance adjustment
5
63-11
Used to set the target color balance of the
copy mode auto color balance adjustment
copy mode auto color balance adjustment
5
64-1
Test print (self print) (color mode)
64-2
Test print (self print) (monochrome mode)
8
64-4
Printer test print (self print)
64-5
Printer test print (self print) (PCL)
1-4
64-6
Printer test print (self print) (PS)
65-1
Used to adjust the touch panel (LCD display
section) detection coodinates
section) detection coodinates
7
65-2
Used to display the touch panel (LCD display
section) detection coodinates
section) detection coodinates
65-5
Used to check the operation panel key input
66-1
Used to display the image send-related soft
SW (2-150) on the LCD to allow changing the
soft SW while checking with the LCD
SW (2-150) on the LCD to allow changing the
soft SW while checking with the LCD
2-3
66-2
Used to enter a country code and set the
default value for the country code
default value for the country code
66-3
Used to check read/write of the EEPROM and
the SDRAM on the MODEM controller and
display the result
the SDRAM on the MODEM controller and
display the result
66-4
Used to send the selected signals to the line
and the main unit speaker (send level: max)
and the main unit speaker (send level: max)
66-5
Used to send the selected signal to the line
and the main unit speaker (send level: soft
SW setting)
and the main unit speaker (send level: soft
SW setting)
66-6
Used to print the confidential registration
check table (BOX No, BOX name, passcode
check table (BOX No, BOX name, passcode
66-7
Used to output all image data saved in the
image memory
image memory
66-8
Used to send the selected sound message to
the line and the speaker (send level: max)
the line and the speaker (send level: max)
66-9
Used to send the selected sound message to
the line and the speaker (send level: soft SW
setting)
the line and the speaker (send level: soft SW
setting)
66-10
Used to clear the FAX and image send image
data
data
66-11
Used to send the selected signal at 300bps to
the line and the speaker (send level: max)
the line and the speaker (send level: max)
66-12
Used to send the selected signal at 300bps to
the line and the speaker (send level: soft SW
setting)
the line and the speaker (send level: soft SW
setting)
66-13
Used to register dial number for Sim66-14/15/
16 dial test
16 dial test
66-14
Used to execute the dial pulse (10pps) send
test and to adjust the make time
test and to adjust the make time
66-15
Used to execute the dial pulse (20pps) send
test and to adjust the make time
test and to adjust the make time
66-16
Used to execute the DTMF signal send test
and to adjust the send level
and to adjust the send level
66-17
Used to send the DTMF signal to the line and
the speaker (send level: max)
the speaker (send level: max)
66-18
Used to send the DTMF signal to the line and
the speaker (send level: soft SW setting)
the speaker (send level: soft SW setting)
66-21
Used to print the selected items (system error,
protocol monitor)
protocol monitor)
Sim
No.
Easy Mode
In
st
a
lla
ti
o
n
Main
te
nance
Adjus
tm
e
nt and
Set
ti
ngs
2
: ‘16/Sep.
2
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man5) service manuals if exist.