Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man5) Service Manual online
MX-4070N SIMULATION 6 – 6
44-37
Used to set the development bias correction
level in the continuous printing operation
level in the continuous printing operation
44-43
Used to display the identification information
of the developing unit
of the developing unit
44-62
Used to set the process control execution
conditions
conditions
46-1
Used to adjust the copy density in the copy
mode
mode
46-2
Used to adjust the copy density in the copy
mode
mode
46-4
Used to adjust the density in the image send
mode
mode
46-5
Used to adjust the density in the image send
mode
mode
46-8
Used to adjust the image send mode color
balance RGB
balance RGB
46-9
Used to adjust the scan image density
3
46-10
Used to adjust the copy color balance and the
gamma (for each color copy mode)
gamma (for each color copy mode)
46-16
Used to adjust the monochrome copy density
and the gamma (for each monochrome copy
mode)
and the gamma (for each monochrome copy
mode)
46-19
Used to set the operating conditions for the
density scanning (exposure) of monochrome
auto copy mode documents
density scanning (exposure) of monochrome
auto copy mode documents
46-21
Copy color balance adjustment (manual
adjustment)
adjustment)
1-3
5
46-23
Used to set the density correction of copy high
density section (high density tone gap
supported)
density section (high density tone gap
supported)
46-24
Copy color balance adjustment (auto
adjustment)
adjustment)
5
46-25
Used to adjust the copy color balance (single
color copy mode)
color copy mode)
46-26
Used to reset the single color mode color
balance set value to the default
balance set value to the default
46-27
Used to adjust the gamma/density of copy
images, text and line image edges
images, text and line image edges
46-30
Used to adjust the resolution in the sub
scanning direction in the copy mode
scanning direction in the copy mode
46-32
Used to adjust the document background
density reproducibility in the monochrome
auto copy mode
density reproducibility in the monochrome
auto copy mode
46-36
Used to adjust the colors in the two color copy
mode
mode
46-37
Used to adjust the reproduction capability of
monochrome mode color
monochrome mode color
46-38
Used to adjust the black component amount
in the color copy mode
in the color copy mode
46-39
Used to adjust the sharpness of FAX send
images
images
46-40
Used to adjust the FAX send image density
(Collective adjustment of all the modes)
(Collective adjustment of all the modes)
46-41
Used to adjust the FAX send image density
(Normal)
(Normal)
46-42
Used to adjust the FAX send image density
(Fine)
(Fine)
46-43
Used to adjust the FAX send image density
(Super fine)
(Super fine)
46-44
Used to adjust the FAX send image density
(Ultra fine)
(Ultra fine)
46-45
Used to adjust the FAX send image density
(600dpi)
(600dpi)
46-46
Used to adjust the FAX send image density
(RGB RIP)
(RGB RIP)
46-47
Used to set the compression rate of copy and
scan images (JPEG)
scan images (JPEG)
46-48
Used to set the copy output resolution of copy
mode
mode
Sim
No.
Easy Mode
In
st
a
lla
ti
o
n
Main
te
nance
Adjus
tm
e
nt and
Set
ti
ngs
46-51
Used to adjust the gamma for the copy mode
heavy paper mode and the image process
mode
heavy paper mode and the image process
mode
46-52
Used to set the gamma default for the copy
mode heavy paper and the image process
mode
mode heavy paper and the image process
mode
1-3
46-54
Used to perform the engine halftone
automatic density adjustment (dither)
automatic density adjustment (dither)
1-3
46-55
Used to adjust the drop out color in the image
send mode (monochrome manual text mode)
send mode (monochrome manual text mode)
46-58
Used to set the copy mode pseudo resolution
(smoothing process)
(smoothing process)
46-60
Used to adjust the sharpness in the copy/scan
mode
mode
46-61
Used to adjust the area separation recognition
level
level
46-62
Used to set the operating condition of the ACS
the area separation the background image
process and the auto exposure mode
the area separation the background image
process and the auto exposure mode
46-63
Used to adjust the density in the copy low
density section
density section
46-65
Used to set the color correction table
46-66
Used to adjust the reproduction capability of
watermarks in the copy/printer mode
watermarks in the copy/printer mode
46-68
Used to adjust the auto resolution judgement
(For MX-xx60/xx70 series)
(For MX-xx60/xx70 series)
46-74
Copy color balance adjustment (Auto
adjustment)/printer color balance adjustment
(Auto adjustment)
adjustment)/printer color balance adjustment
(Auto adjustment)
1-1
-5
2-2
-3
1-2
-3
46-90
Used to set the process operation of high
compression PDF images
compression PDF images
46-91
Used to adjust the reproduction capability of
black text
black text
48-1
Used to adjust the scan image magnification
ratio (in the main scanning direction and the
sub scanning direction)
ratio (in the main scanning direction and the
sub scanning direction)
1-1
48-5
Used to correct the scan image magnification
ratio (in the sub scanning direction)
ratio (in the sub scanning direction)
1-1
48-6
Used to adjust the rotation speed of each
motor
motor
49-1
Used to perform the firmware update
4
5
49-3
Used to update the operation manual
4
5
49-5
Used to perform the watermarks update
4
5
49-6
Used to perform the OCR update
49-10
Used to perform the ACU update
50-1
Copy image position, image loss adjustment
1-1
50-5
Used to adjust the print lead edge image
position
position
1-1
50-6
Used to adjust the copy image position and
the image loss (SPF mode)
the image loss (SPF mode)
1-1
50-10
Used to adjust print image position
1-2
2-1
1-1
50-12
Used to perform the scan image off center
position adjustment
position adjustment
1-1
50-20
Image registration adjustment (Main scanning
direction)
direction)
1-2
50-22
Used to adjust the image registration (Main
scan direction, sub scan direction)
scan direction, sub scan direction)
1-1
2-1
1-1
-2
50-23
Used to set the registration for temperature
adjustment
adjustment
50-24
Used to display the detail data of SIM 44-2,
50-20, 21 and 22
50-20, 21 and 22
50-27
Used to perform the image loss adjustment of
scanned images in the FAX or image send
mode
scanned images in the FAX or image send
mode
50-28
Used to automatically adjust the image loss,
void area, image off center and image
magnification ratio
void area, image off center and image
magnification ratio
Sim
No.
Easy Mode
In
st
a
lla
ti
o
n
Main
te
nance
Adjus
tm
e
nt and
Set
ti
ngs
2
: ‘16/Sep.
2
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man5) service manuals if exist.