Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
○＝applied
Preview.
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
144
FAX
Correction of the problem that the original may be recognized as the blank
page when loading the original to the original glass and then sending the
FAX.
○
○
○
○
145
FAX
Support of the processing to clear SystemError information when executing
Sim66-42:
SystemError information is stored to EEPROM inside PIC of FAXBOX,
however there was no processing to clear this information.
○
○
○
○
146
FAX
Modification has been made to directly send FAX without deleting "-
(hyphen )".
○
○
○
○
147
FAX
Improvement of activation processing to fix F6-00 error which occurred
when initial communication with Fax box failed at power-on or recovery from
1W power save mode
○
○
○
○
148
FAX
Correction of improper calling on external phone which occurred under
following conditions:
- The Number of Calls in Auto Reception is set to 0.
- The Fax Soft SW "Ringtone of external phone for recovery from nighttime
Fax mode after call-in" is set to "0: No ringtone".
- MFP is recovering from power-save mode or nighttime mode due to
incoming call.
○
○
○
○
149
FAX
Correction of E7-91 error which occurred on rare occasions when the MFP
failed to create image data properly while receiving Fax data depends on
the condition of MFP.
○
○
○
○
150
FAX
Correction of failure to ring proper number of times
MFP ringed 2 times upon incoming call from the other side during 1W
power-save or 1W nighttime mode while Number of Calls in Reception is set
to 1 time.
○
○
○
○
151
FAX
Correction of failure to perform proper broadcast transmission:
This problem occurs when an address with “I-Fax Reception Report” feature
is selected first and then the address without the feature is selected next.
This problem occurs when an address with “I-Fax Reception Report” feature
is selected first and then the address without the feature is selected next.
○
○
Done
Done
152
FAX
Modification has been made to send the image with I-FAX Spec to all
destinations when broadcasting including the I-FAX destination.
○
○
Done
Done
153
FAX
Modification has been made to be unable to change the settings of Density,
Resolution, and Format when sending I-FAX (including Broadcasting
containing I-FAX destinations) and add the setting to change the standard
format of I-FAX to System Settings.
*When updating the version from 0201K100_16011400 or earlier version,
the modification will not be reflected.
○
○
Done
Done
154
FAX
Correction of difference in the volume
Set “Fax Send Complete Signal / Fax Receive Complete Signal /
Transmission Error Sound” in System Settings -> Speaker Volume
Settings. The volume output upon pressing the confirmation key and the
volume at the actual connection differs.
○
○
Done
Done
155
FAX
Modification has been made to print the whole area of the original when
printing the original image on to Transaction Report.
○
○
Done
Done
156
FAX
Correction of PPD2_PRI jam which occurred while printing Fax data on
particular size paper (approx. 182 mm x 182 mm)
○
○
Done
Done
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) service manuals if exist.