Read Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man37) Service Manual online
MX-3640N AR-SU1 (STAMP UNIT) 19 – 1
MX-3640N
Service Manual
[19] AR-SU1 (STAMP UNIT)
1. Unpacking
A. Packed items check
*1: When replacing the stamp cartridge, Refer to “Stamp cartridge
replacement” in the “Operation Guide” (PDF document). The user
must be notified of that. (Do not refer to “Stamp cartridge replace-
ment procedure” (package part).)
2. Installation
Before installation, be sure to turn both the oper ation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.
A. RSPF unit removal
1) Remove the harness guide and Disconnect the connector.
When disconnecting the connector, be careful of the harness
of the scanner home position sensor.
2) Remove the RSPF unit from the main unit.
3) Put the RSPF unit on a stable table with the OC mat upside.
B. Stamp unit attachment
1) Open the OC mat.
2) Remove the sensor cover.
3) Remove the screw from the stamp unit mounting section. Use
the removed screw to attach the stamp unit together with the
earth wire, and connect the connector.
No.
Name
Quantity
1
Stamp unit
1
2
Stamp cartridge replacement procedure
*1
1
3
Stamp cartridge
3
4
Installing screw
1
1
2
3
4
1
1
2
3
1
1
2
1
2
2
4
5
4
3
Click on the first or last page to see other MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man37) service manuals if exist.