Read Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man37) Service Manual online
MX-3640N MX-FX11 (FACSIMILE EXPANSION KIT) 18 – 2
C. I/F cable connection
1)
Connect the I/F cable to the MFP controller PWB, and fix the
binding band (and FG line (Taiwan, Brazil, South Africa)) with
the M3 screw included in the package.
binding band (and FG line (Taiwan, Brazil, South Africa)) with
the M3 screw included in the package.
Check to confirm that it is securely connected.
(Except Taiwan, Brazil, South Africa)
(Except Taiwan, Brazil, South Africa)
(Taiwan, Brazil, South Africa)
It is necessary to attach the ferrite core included in the main
unit.
It is necessary to attach the ferrite core included in the main
unit.
D. Shield plate and left cabinet attachment
1)
Attach the shield plate.
2)
Attach the left cabinet.
E. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
F. Destination setting
1)
Enter the SIM26-6 mode.
2)
Check to confirm that the destination setting of the machine
matches the specifications of the FAX destination. If not, the
FAX may not function properly.
matches the specifications of the FAX destination. If not, the
FAX may not function properly.
G. Clear the FAX related software switches
1)
Enter the SIM66-2 mode.
2)
Press DEST CODE button.
3)
Take a note of the corresponding destination code.
4)
Press BACK button to return to the code entry mode.
5)
Enter the destination code taken in procedure 3), and press
SET button.
SET button.
6)
Press EXECUTE and YES buttons.
H. Line cable connection
1)
Connect the line cable on the line to the modular jack indicated
as “LINE.”
as “LINE.”
When connecting the line cable (to LINE or TEL), wind the line
cable two turns or one turn around the included ferrite core as
shown in the figure, and connect to the modular jack which is
marked with “LINE.”
cable two turns or one turn around the included ferrite core as
shown in the figure, and connect to the modular jack which is
marked with “LINE.”
After connection, perform the setting of “External telephone con-
nection” of the system setting (administrator).
nection” of the system setting (administrator).
2
1
Core
1
2
2
1
2
Except Taiwan, Brazil,
South Africa
South Africa
Taiwan, Brazil,
South Africa
South Africa
About
10 cm
10 cm
2 turns
About
10 cm
10 cm
1 turn
1
1
: '13/Oct
Click on the first or last page to see other MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man37) service manuals if exist.