Read Sharp MX-2630 (serv.man6) Handy Guide online
SHARP
REPAIR HINTS
MX-2630N Handy Guide NOV’17
Sharp Office Solutions Group
Page 71
/75
GENERAL SPECIFICATION
Query
Unable to install MXEB18
Advice
Due to a change of connector/harness on the
main unit, only MXEB18 manufactured from
July 2017 onwards have the new type USB
Connector that is compatible with MX2630N.
The new type USB connector can also be
identified by the addition of a blue dot
main unit, only MXEB18 manufactured from
July 2017 onwards have the new type USB
Connector that is compatible with MX2630N.
The new type USB connector can also be
identified by the addition of a blue dot
Query
Can I install the current version of MXFR51U
onto MX2630N?
onto MX2630N?
Advice
Although MXFR51U will be a common option
for MX2630N & MX3050N series, the latest DSK
version available (0650Kc00) is supported on
MX3050N only. MXFR51U will be supported on
MX2630N from November 2017.
for MX2630N & MX3050N series, the latest DSK
version available (0650Kc00) is supported on
MX3050N only. MXFR51U will be supported on
MX2630N from November 2017.
Query
Is it possible to install MX-DE25-29, MX-FN27,
MX-RB25, MX-TR19 or MX-LC17 on to
MX-2630N?
MX-RB25, MX-TR19 or MX-LC17 on to
MX-2630N?
Advice
Due to a change of connector, only “N”
peripherals are supported on MX-2630N
peripherals are supported on MX-2630N
Query
Is it possible to print from iOS using AirPrint™
with User Authentication?
with User Authentication?
Advice
Due to an iOS limitation, only username &
password is supported. Apply the following
settings to ensure correct operation:-
Network settings > External Print Services
Settings > AirPrint Settings > IPP-SSL Enabled;
User Control > Default Settings > Enable IPP
Authentication Except for Printer Driver
If you wish to prevent non authorised printing,
check the following option:-
User Control > Default Settings > Disabling of
Printing by Invalid User
password is supported. Apply the following
settings to ensure correct operation:-
Network settings > External Print Services
Settings > AirPrint Settings > IPP-SSL Enabled;
User Control > Default Settings > Enable IPP
Authentication Except for Printer Driver
If you wish to prevent non authorised printing,
check the following option:-
User Control > Default Settings > Disabling of
Printing by Invalid User
Query
Unable to use AirPrint™ Fax & AirPrint™ Scan
features from iOS
features from iOS
Advice
Currently, iOS does not support Fax and Scan
feature (limitation of AirPrint™) however, these
new features are available when using Mac
OSX.
feature (limitation of AirPrint™) however, these
new features are available when using Mac
OSX.
Query
Within Job Status display, is it possible to view
Estimate Job Start Time?
Estimate Job Start Time?
Advice
To enable this function, change SIM55-03
SW35-1 from 0 (default) to 1.
SW35-1 from 0 (default) to 1.
Query
Google Cloud Print & Mopria settings are
missing from the Web Interface (Network
Settings)
missing from the Web Interface (Network
Settings)
Advice
To support Google Cloud Print & Mopria, the
MXPK13 PS Expansion kit must be
installed/enabled.
MXPK13 PS Expansion kit must be
installed/enabled.
GENERAL SPECIFICATION [CONT’D]
Query
Is it possible to Tandem MX-2630N series with
another MX colour device?
another MX colour device?
Advice
Tandem operation is only supported on
MX-2630N (Copy Mode) & MX-2630N –
MX6070N series (Print Mode).
MX-2630N (Copy Mode) & MX-2630N –
MX6070N series (Print Mode).
IMAGE QUALITY
Query
Image distortion, only when copying or
scanning (optical section appears OK).
scanning (optical section appears OK).
Advice
Check/Replace the CCD Unit.
Note: Perform scanner (CCD) colour balance &
gamma and white balance adjustment after
replacement.
Note: Perform scanner (CCD) colour balance &
gamma and white balance adjustment after
replacement.
FIRMWARE & MAINTENANCE
Query
Is the E-Manual Firmware common with
MX-3050N series?
MX-3050N series?
Advice
Although the firmware version is similar (K1),
the E-Manual data for MX-2630N is currently
different as it contains the User Manual(s) for
MX-2630N only.
the E-Manual data for MX-2630N is currently
different as it contains the User Manual(s) for
MX-2630N only.
Query
Noise is generated after carrying out Fusing
Unit maintenance.
Unit maintenance.
Advice
Check/Inspect the heater lamp has been
installed into the holder properly (or the lamp
holder is not damaged).
installed into the holder properly (or the lamp
holder is not damaged).
Query
USB memory device is not recognised when
trying to update firmware
trying to update firmware
Advice
Check the USB version of the USB memory
device as USB3.1 devices may not be
recognised. Also ensure the USB device is
formatted using FAT32.
device as USB3.1 devices may not be
recognised. Also ensure the USB device is
formatted using FAT32.
GENERAL / MISC
Query
HV Errors when Executing SIM 44-6 (High-
Density Process Control)
Density Process Control)
Advice
Ensure the Secondary Transfer Roller is
installed correctly and there is no uneven gap
between the Transfer Roller and Secondary
Transfer Separation Plate - Reinstall the
Secondary Transfer Roller following the
procedure detailed within the Service Manual.
installed correctly and there is no uneven gap
between the Transfer Roller and Secondary
Transfer Separation Plate - Reinstall the
Secondary Transfer Roller following the
procedure detailed within the Service Manual.
Query
What is the part code for the optional RS232
Connector PWB Unit that attaches to the SCN-
MFP PWB?
Connector PWB Unit that attaches to the SCN-
MFP PWB?
Advice
DUNT-9009DS11
Click on the first or last page to see other MX-2630 (serv.man6) service manuals if exist.