Read Sharp MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man138) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-344/362/377
No
Subject
Description
48
User Control menu of WEB Page
Modification has been implemented to display "User Control"
menu in any Authority pages (Administrator/User/Service) on
the menu of WEB Page.
menu in any Authority pages (Administrator/User/Service) on
the menu of WEB Page.
49
Authority group duplicated by device cloning
When importing the authority groups, they were added without
overwriting, so some authority groups which had the same
name existed:
Modification has been implemented to overwrite instead of
adding when importing.
overwriting, so some authority groups which had the same
name existed:
Modification has been implemented to overwrite instead of
adding when importing.
50
Addition of Port Control in Web Settings List
The setting of "Security Settings (Port Control)" has been
added in Web Settings List.
added in Web Settings List.
51
Serial number print on Setting List
When printing the setting lists etc., we could not find the
setting information belonged to which machine. Modification
has been implemented to print the serial number in the list to
recognise the information.
setting information belonged to which machine. Modification
has been implemented to print the serial number in the list to
recognise the information.
52
Coin Vendor Interface
Support is provided for the serial interface of coin vendor.
53
Coin-vend - colour status signals on MX-series
On the interface of Coin-Vendor, Colour Status Signal
（ CV_COLOR0、CV_COLOR1） after the job completion
retained the last colour status, but the modification has been
made to retain B/W status.
（ CV_COLOR0、CV_COLOR1） after the job completion
retained the last colour status, but the modification has been
made to retain B/W status.
Upgrade 03
From July 2006 production
ROM control No.
ICU
(PROGRAM)
ICU
(BOOT)
PCU
SCU
IMAGE
DATA
FAX
C01
0110P0
* 0110P0
0110P0
0110P0
0101P0
010300
*The version of the above ICU (BOOT) is the version written in the ROM control label.
Check that the actual version of this ICU is
“ICU (BOOT): 01.00.00/LANGUAGE: 01c03.00/GRAPHIC: 01.00.00” by using Sim22-5.
“ICU (BOOT): 01.00.00/LANGUAGE: 01c03.00/GRAPHIC: 01.00.00” by using Sim22-5.
Item of change: See below
No.
Subject
Description
1
Correction of size
illegal jam
illegal jam
If the paper size is different from the size detected by the machine, it used to be handled
as the illegal jam. Modification has been implemented not to handle it as the jam but to
output it as the invalid paper and display the message "Please check the paper size".
as the illegal jam. Modification has been implemented not to handle it as the jam but to
output it as the invalid paper and display the message "Please check the paper size".
On the system with the options of Finisher Desk etc., it is necessary to upgrade the
version of firmware for those options at the same time.
version of firmware for those options at the same time.
(MX-FNX1/FNX2 : 010300, MX-DEX1/DEX2 : 0101P0)
2
Value of Colour
Balance Manual
Adjustment cannot be
reflected into User
Auto Calibration
Balance Manual
Adjustment cannot be
reflected into User
Auto Calibration
On Colour Balance Manual Adjustment, modification has been implemented to reflect the
adjustment value after the manual adjustment and the value after conducting Half Tone
Density Correct Execution into User Auto Calibration.
adjustment value after the manual adjustment and the value after conducting Half Tone
Density Correct Execution into User Auto Calibration.
Even before this change is implemented, there’s no problem for the users who adjust the
colour balance only with Auto.
colour balance only with Auto.
Click on the first or last page to see other MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man138) service manuals if exist.