Read Sharp MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man138) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-344/362/377
No
Subject
Description
26
Coala printing issue
When the judgement of emulation was set to Auto, the
judgement of snifter was not conducted normally due to the
specific code contained in PCL data, other tasks operated as
a priority task, job was skipped reading in-progress, and as
the result, a part of the job before it was skipped reading was
only printed out. Modification has been implemented to
prioritise PCL tasks.
judgement of snifter was not conducted normally due to the
specific code contained in PCL data, other tasks operated as
a priority task, job was skipped reading in-progress, and as
the result, a part of the job before it was skipped reading was
only printed out. Modification has been implemented to
prioritise PCL tasks.
27
Support of the duplex layout from SAP print
It's been pointed out that the layout of the front and back page
differed from what users were expected when printing duplex
from SAP. Modification has been implemented to switch the
layout with Soft SW.
Soft SW3-7 0： OFF (Default setting)
differed from what users were expected when printing duplex
from SAP. Modification has been implemented to switch the
layout with Soft SW.
Soft SW3-7 0： OFF (Default setting)
1： ON
28
Problem with WINS and DNS
There was a case where scan data could not be saved in the
shared folder of the server in the segment outside of the
network segment in which MX series were placed.
This occurred only if the address of SMB Sending was
specified as the server name (computer name), and if the
address was specified with IP address direct, scan data could
be saved in normal. As for the conventional Scan To E-mail,
Scan To FTP, and Scan To Desktop, there is no problem in
its operation. Modification has been implemented to save the
scan data into the shared holder even if specifying the server
name (computer name).
shared folder of the server in the segment outside of the
network segment in which MX series were placed.
This occurred only if the address of SMB Sending was
specified as the server name (computer name), and if the
address was specified with IP address direct, scan data could
be saved in normal. As for the conventional Scan To E-mail,
Scan To FTP, and Scan To Desktop, there is no problem in
its operation. Modification has been implemented to save the
scan data into the shared holder even if specifying the server
name (computer name).
29
Cannot backup and restore German umlauts
Since the language information could not be imported
properly, user name etc. was incorrect: Modification has been
implemented to import the language information properly.
properly, user name etc. was incorrect: Modification has been
implemented to import the language information properly.
30
A4 is output after A4-R runs out in the bypass tray
Modification has been implemented to handle the paper using
the paper size previously detected just like the trays other
than the bypass tray if a paper size becomes UNKNOWN.
the paper size previously detected just like the trays other
than the bypass tray if a paper size becomes UNKNOWN.
31
Auto colour and watermark
If B/W document was printed in AUTO mode selecting
coloured Water Mark, the Water Mark was regarded as B/W,
and the Water Mark was printed in B/W as well:
Modification has been implemented to judge Colour/B/W of
Water Mark area correctly, and to print in colour when the
WaterMark is Colour.
coloured Water Mark, the Water Mark was regarded as B/W,
and the Water Mark was printed in B/W as well:
Modification has been implemented to judge Colour/B/W of
Water Mark area correctly, and to print in colour when the
WaterMark is Colour.
32
b/w direct print via USB or web
There were some cases where halftone pattern was not
printed properly if PS/PDF file was printed in B/W mode.
There was a problem on the initialisation of PS B/W screen,
and the screen process did not work properly when switching
the screen:
Initialisation of B/W screen has been corrected.
printed properly if PS/PDF file was printed in B/W mode.
There was a problem on the initialisation of PS B/W screen,
and the screen process did not work properly when switching
the screen:
Initialisation of B/W screen has been corrected.
33
Unable to print postscript file
On the processing for the minimum size of curve command,
Exception Handling occurred, and the process hung up if
underflow occurred in the calculating formula:
Arithmetic processing has been corrected.
Exception Handling occurred, and the process hung up if
underflow occurred in the calculating formula:
Arithmetic processing has been corrected.
34
Ignoring command for number of copies
If the number of sets were specified with the PCL command,
the Collate setting internally remained ON, and Uncollate
mode did not work:
Modification has been implemented to be able to switch
Collate setting as well when processing PCL Copy Command.
the Collate setting internally remained ON, and Uncollate
mode did not work:
Modification has been implemented to be able to switch
Collate setting as well when processing PCL Copy Command.
35
Shaded characters are printed being crushed
If a PDF file created by Illustrator was printed from
AcrobatReader on PS mode, a part of the shaded characters
were printed with being crushed:
This glitch has been corrected.
AcrobatReader on PS mode, a part of the shaded characters
were printed with being crushed:
This glitch has been corrected.
36
Bad reproduction of the colours when direct printHPGL files
When printing the HP-GL data with Direct Print, a part of the
image had a different colour as that of the HP printer. When
printing the HP-GL data with Direct Print, colour was
converted in RGB mode because PJL command in Colour
mode setting was not specified:
Modification has been implemented to convert the colour in
RGB mode even if Colour mode setting is not specified.
image had a different colour as that of the HP printer. When
printing the HP-GL data with Direct Print, colour was
converted in RGB mode because PJL command in Colour
mode setting was not specified:
Modification has been implemented to convert the colour in
RGB mode even if Colour mode setting is not specified.
Click on the first or last page to see other MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man138) service manuals if exist.