Read Sharp MX-1800N (serv.man15) Service Manual online
MX-1800N SIMULATION 7 – 9
2-2
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the sen-
sors and detectors in the automatic docu-
ment feeder unit and the related circuits.
ment feeder unit and the related circuits.
Section
RSPF
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
The active sensors and detectors are highlighted.
The operating conditions of the sensors and detectors are dis-
played.
The active sensors and detectors are highlighted.
NOTE: SWD_LEN and SWD_AD are not ON/OFF display.
2-3
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the loads
in the automatic document feeder unit and
the control circuits.
the control circuits.
Section
RSPF
Operation/Procedure
1) Select the item to be checked with the keys on the touch
1) Select the item to be checked with the keys on the touch
panel.
2) Touch [EXECUTE] key.
The selected load operation is performed.
When [EXECUTE] key is touched, the operation is terminated.
When [EXECUTE] key is touched, the operation is terminated.
*1: Since the stamp solenoid is an option unit, it can be operated
only when it is installed.
* For the same loads displayed separately depending on normal
only when it is installed.
* For the same loads displayed separately depending on normal
rotation and rotation, if they are selected together, normal rota-
tion is performed.
In addition, if the load is rotating, reverse rotation is not accepted
until the operation is stopped.
tion is performed.
In addition, if the load is rotating, reverse rotation is not accepted
until the operation is stopped.
3
3-2
Purpose
Operation test/check
Function (Purpose) Used to check the operation of sensor and
detector in the finisher and the related cir-
cuit.
cuit.
Section
Finisher
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
The active sensors and detectors are highlighted.
The operating conditions of the sensors and detectors are dis-
played.
The active sensors and detectors are highlighted.
<Inner finisher>
<Inner finisher punch unit>
SSET
SPF installation detection
SOCD
SPF open/close detection
SCOV
SPF cover SW
SPED
SPF document empty detection
SPPD1
SPF paper entry detection 1 and random detection
(common)
(common)
SPPD2
SPF paper entry detection 2 PS front
SPPD3
SPF before-scan detection
SPPD4
SPF Reverse gate front detection
SPPD5
SPF Reverse rear detection
SPLS1
SPF Document length detection short
SPLS2
SPF Document length detection long
STMPU
SPF stamp unit installation detection
SWD_LEN
SPF guide plate position
SWD_AD
SPF document detection volume output
CLOSE
BLACK(SLOW)
0
SIMULATION NO.02-01
RSPF AGING
TEST
EXECUTE
150
200
ZOOM
100
%
BLACK(FAST)
COLOR
2-SIDE
1-SIDE
25
50
100
300
400
0
RSPF SENSOR CHECK SWD_LEN: **** SWD_AD: ***
CLOSE
SIMULATION NO.02-02
TEST
1/1
SSET
SOCD
SCOV
SPED
SPPD1
SPPD2
SPPD3
SPPD4
SPPD5
SPLS1
SPLS2
STMPU
SPFM
SPF transport motor
SPRM_F
SPF paper feed reverse motor normal rotation
SPRM_R
SPF paper feed reverse motor reverse rotation
SPFC
SPF paper feed clutch
SRRC
SPF resist roller clutch
SGS
SPF document exit gate solenoid
STMPS
Finish stamp solenoid (*1)
FED
Entry port paper detection
FBED
Tray paper detection
FULD
Tray upper limit detection
FMLLD
Tray intermediate lower limit detection
FLLD
Tray lower limit detection
FSLD1
Paper surface detection 1
FSLD2
Paper surface detection 2
FRLD
Roller up/down detection
FBRD
Belt separation detection
FFJHPD
Alignment plate HP detection front
FRJHPD
Alignment plate HP detection rear
FJPD
Alignment guide position detection
FSTPD
Staple tray paper detection
FSHPD
Staple drive HP detection
FSTHPD
Staple shift HP detection
FSD
Staple empty detection
FSTD
Staple lead edge position detection
FDSW
Door open detection
FFANLK
Fan motor lock detection
FPRPD
Punch rear position detection
FPUC
Punch unit connection detection
FPHPD
Punch HP detection
FPSHPD
Punch horizontal resist HP detection
FPDD
Punch dust detection
FPPEND
Punch paper rear edge detection
FPPD1
Punch paper surface detection 1
FPPD2
Punch paper surface detection 2
SIMULATION NO.02-03
TEST
RSPF OUTPUT CHECK
SPFM
SPRM_F
SPRM_R
SFPC
SRRC
SGS
1/1
EXECUTE
0
STMPS
CLOSE
Click on the first or last page to see other MX-1800N (serv.man15) service manuals if exist.