MX-1800N (serv.man15). Section 7 - Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 4

MX-1800N  SIMULATION  7 – 4

22

11

Used to check the use frequency (send/receive) of FAX. (Only when FAX is 
installed)

FAX

Adjustment/Setup/Operation 
data check

12

Used to check the RSPF misfeed positions and the number of misfeed at each 
position. (When the number of misfeed is considerably great, it can be judged as 
necessary for repair.)

RSPF

Adjustment/Setup/Operation 
data check

13

Used to check the operating time of the process section (OPC drum, DV unit, 
toner cartridge).

—

Adjustment/Setup/Operation 
data check

19

Used to check the values of the counters related to the scan mode and the 
internet FAX mode.

Scanner

Adjustment/Setup/Operation 
data check

90

Used to output the various set data lists. 

—

Adjustment/Setup/Operation 
data check

23

2

Used to check the trouble history of paper jam and misfeed. (If the number of 
misfeed and troubles is considerably great, it may be judged as necessary to 
repair.)

—

Adjustment/Setup/Operation 
data check

80

Used to check the operations of the sensors and detectors in the paper feed and 
transport section.

Paper feed,  transport

Operation test/Check

24

1

Used to clear the jam counter, and the trouble counter. (The counters are 
cleared after completion of maintenance.)

—

Data clear

2

Used to clear the number of use (the number of prints) of each paper feed 
section.

—

Data clear

3

Used to clear the number of use of the finisher, RSPF, and the scan (reading) 
unit.

—

Data clear

4

Used to clear the maintenance counter, the printer counters of the transfer unit 
and the fusing unit. (After completion of maintenance, clear the counters.)

—

Data clear

5

Used to clear the developer counter. (After replacement of developer, clear the 
counter.)

—

Data clear

6

Used to clear the copy counter.

—

Data clear

7

Used to clear the OPC drum counter. (After replacement of the OPC drum, clear 
the counter.)

—

Data clear

9

Used clear the printer mode print counter and the self print mode print counter.

—

Data clear

10

Used to clear the FAX counter. (Only when FAX is installed)

—

Data clear

15

Used to clear the counters related to the image send.

—

Data clear

30

Used to initialize the administrator password.

—

Data clear

31

Used to initialize the service mode password.

—

Clear

25

1

Used to check the operations of the developing section.

Process 
(Developing section)

Operation test/Check

2

Used to make the initial setting of toner concentration when replacing developer.

Process (Photoconductor/
Developing/
Transfer/Cleaning)

Setting

26

1

Used to set the paper exit tray (MX-TRX1).

Paper exit

Setting

3

Used to set the specifications of the auditor.

Auditor

Setting

5

Used to set the count mode of the total counter and the maintenance counter.

—

Setting

6

Used to set the specifications (paper, fixed magnification ratio, etc.) of the 
destination.

—

Setting

10

Used to set the trial mode of the network scanner.

—

Setting

18

Used to set the toner save mode.

—

Setting

30

Used to set allow/inhibit of HL slow-up control (CE mark support control).

—

Setting

35

Used to set the display mode of Sim22-4 trouble history when a same trouble 
occurred repeatedly, There are two mode display as one trouble and display as 
several series of troubles.

—

Setting

38

Used to set Continue/Stop of print when the developer life is reached.

Other

Setting

41

Used to set YES/NO of AMS setting in the center binding mode.

—

Setting

49

Used to set the copy speed mode.

—

Setting

50

Used to set functions.

—

Setting

52

Used to set whether non-printed paper (insertion paper, cover paper) is counted 
up or not.

—

Setting

53

Used to set YES/NO of the auto color calibration.

—

Setting

54

Used to set the printer calibration YES/NO.

Printer

Setting

65

Used to set the finisher alarm mode.

—

Setting

67

Used to set the summer time (switching timing to the summer time and the 
adjustment time (shift amount)) and the time zone (for switching to the summer 
time and the difference between the local time and GMT (UTC) for 
synchronization with the internet time server).

—

Setting

69

Used to set whether the toner preparation message and the toner near end 
message are displayed or not when the toner quantity reaches 25%.

Process

Setting

27

1

Used to set whether the detection of communication error with RIC (U7-00) is 
disabled or not.

Communication 
(RIC/MODEM)

Operation test/Check

12

Used to display the high-density, half-tone process control error history and the 
automatic register adjustment error history.

Process

Adjustment/Setup/Operation 
data output/Check (Display/Print)

13

Used to display the history of paper feed time between sensors.

—

Adjustment/Setup/Operation 
data output/Check (Display/Print)