Read Sharp MX-1800N (serv.man15) Service Manual online
MX-1800N SIMULATION 7 – 13
6-3
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the primary
transfer unit and the related circuit.
Section
Process (Transfer)
Operation/Procedure
1) Touch [EXECUTE] key.
2) The load operation is started. (Separation operation: BLACK
1) Touch [EXECUTE] key.
2) The load operation is started. (Separation operation: BLACK
→ COLOR → FREE Stops at each position for 5 sec.) During
the operation, the current position is displayed.
the operation, the current position is displayed.
7
7-1
Purpose
Setting
Function (Purpose) Used to set the operating conditions of
aging.
Section
Other
Operation/Procedure
1) Select the target to be set with keys on the touch panel.
2) Touch [EXECUTE] key.
1) Select the target to be set with keys on the touch panel.
2) Touch [EXECUTE] key.
The machine is rebooted in the aging mode.
The contents set with this simulation are retained until the
power is turned OFF.
The contents set with this simulation are retained until the
power is turned OFF.
7-6
Purpose
Setting
Function (Purpose) Used to set the intermittent aging cycle.
Section
Section
Other
Operation/Procedure
1)
1)
Enter the intermittent aging cycle (unit: sec) with 10-key.
2)
Touch [OK] key.
The time entered in procedure 1) is set.
The time entered in procedure 1) is set.
7-8
Purpose
Operation display
Function (Purpose) Used to display the warm-up time.
Section
Section
Fusing
Operation/Procedure
Touch [EXECUTE] key.
Counting of the warm-up time is started.
* Interruption of counting by touching [EXECUTE] key is inhibited.
Touch [EXECUTE] key.
Counting of the warm-up time is started.
* Interruption of counting by touching [EXECUTE] key is inhibited.
7-9
Purpose
Operation test/check
Function (Purpose) Used to check printing in the color mode.
Section
Section
—
Operation/Procedure
1)
1)
Select a print color with keys on the touch panel.
2)
Touch [EXECUTE] key.
Printing is started in the selected color.
Printing is started in the selected color.
* If no color is specified, printing is made in all colors.
BLACK
Black mode position
Black mode position
→ COLOR mode position
→ Drum separation position
→ Shift to the black mode
position is repeated.
→ COLOR mode position
→ Drum separation position
→ Shift to the black mode
position is repeated.
COLOR
COLOR mode position
FREE
Drum separation position
AGING
Aging operation setup
INTERVAL
Intermittent setup
MISFEED DISABLE
JAM detection enable/disable setup
FUSING DISABLE
Fusing operation enable/disable setup
WARMUP DISABLE
Warm-up disable setup
DV CHECK DISABLE
DV unit detection enable/disable setup
SHADING DISABLE
Shading disable setup
CCD GAIN FREE
CCD gain adjustment free setup
0
SIMULATION NO.06-03
TEST
TRANSFER LOAD CHECK
EXECUTE
POSITION
:
1/1
CLOSE
SIMULATION NO.07-01
TEST
AGING TEST SETTING
AGING
INTERVAL
MISFEED DISABLE
FUSING DISABLE
WARMUP DISABLE
DV CHECK DISABLE
1/1
EXECUTE
0
SHADING DISABLE
CCD GAIN FREE
CLOSE
Item
Item
Set range
Default value
A
CYCLE TIME(SEC)
1 to 900
3
K
Setup/cancel of black
C
Setup/cancel of cyan
M
Setup/cancel of magenta
Y
Setup/cancel of yellow
0
A:
A㧦 3
㧧
CYCLE TIME(SEC)
SIMULATION NO.07-06
INTERVAL AGING CYCLE TIME SETUP
3
㨇
1㨪 900 㨉
OK
TEST
CLOSE
0
SIMULATION NO.07-08
TEST
WARM UP TIME DISPLAY SETTING
CLOSE
EXECUTE
0
SECONDS
Click on the first or last page to see other MX-1800N (serv.man15) service manuals if exist.