DM-2000. DM2000-Handy Guide - Sharp Copying Equipment Handy Guide. Page 10

10

Perform the folloing simulation to enter the simulation mode.

Clear key

Interupt Key

Zero Key

Interupt Key

Main Code

Start Key

Sub Code

Start Key

The following key operations allow to enter the simulation mode from the Fax mode.

9 Key

* Key

8 Key

# Key

7 Key

Main Code

Start Key

Sub Code

Start Key

Execute SIM 66-01 (See above) in fax simulations
Select "1 Yes" in the FAX soft SW set-up
Enter Soft SW number then start key
Select "1 Yes"
Press the bit number to be changed, and the bit number is highlighted
Press start button after making changes
Select "1 Yes" to confirm change