DM-2000. DM2000-Handy Guide - Sharp Copying Equipment Handy Guide

dm-2000 handy guide
Model
DM-2000
Pages
25
Size
313.24 KB
Type
PDF
Document
Handy Guide
Brand
Device
Copying Equipment / DM2000-Handy Guide
File
dm-2000.pdf
Date
Next: Sharp DM-2000 (serv.man2) Specification

Read Sharp DM-2000 Handy Guide online

Handy Guide
Version 2.1
Issue 05/2000
1
SHARP ELECTRONICS (UK)  LTD
COPIER TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
DM2000
HANDY GUIDE
Handy Guide
Version 2.1
Issue 05/2000
2
SHARP ELECTRONICS (UK)  LTD
COPIER TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
The information contained within this guide is subject to change without
prior notice. For latest information access the Sharp Technical Internet
site.
www.tradenet.sharp.co.uk/tech
The Handy Guide is not a substitute for the official Sharp Service
manuals. It is for use by Sharp qualified field service engineers with the
intention of improving the efficiency of Sharp Photocopiers.
Should you have relevant information not included in the guide please
contact the Sharp Copier Hotline by e-mail
[email protected]
If you have any parts enquires please direct them to the following
numbers
Parts Hotline: 0161-204-2642
Parts Fax No: 0161-205-9203
E-mail: [email protected]
Handy Guide
Version 2.1
Issue 05/2000
3
SHARP ELECTRONICS (UK)  LTD
COPIER TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Contents
1.
Machine Specifications
4
2.
Machine Options
5
3.
Machine Installation
6
4.
Routine Maintenance
8
5.
Machine Settings and Adjustments
9
6.
Test Simulations
10
7.
Trouble Code List
15
8.
Fault Finding Guide
16
9.
Firmware Revision Table
17
10.
Machine Flash Upgrade Procedure
18
11.
Printer Board Flash Upgrade Procedure
19
12.
Fast Facts
20
13.
Notes
22
Machine Specifications
Version 2.1
Issue 05/2000
4
SHARP ELECTRONICS (UK)  LTD
COPIER TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
DM-2000
Copy Volume
Optimum
10k
Monthly Max
15k
Firmware Version
MCU
5.23
Maintenance
Interval
150k
Drum Life
30k
Developer Life
15k
Toner Yield @ 6%
15k
Heat Roller Life
150k
Consumables
Drum Cartridge
DM-200DR
Toner/Developer Cartridge
DM-200TD
Upper Heat Roller
AR-160UH
Timings
Warm up time
35 sec
Copy Speed A4
20 ppm
Jam Recovery Time
10 sec
To ready from Pre-heat
<30 sec
First copy time
7.2 sec
Power consumption
230V Max
1.5 KWh
Pre-heat
60 Wh
Auto power shut-off
4.8Wh
Operational
Electronic Sort
With EB3 fitted
Printing
Yes
AMS operation
Yes
APS operation
Yes
Duplex
No
Pre-heat range
30-120 sec
Auto power of range
30-240 min
Technical
Memory
16Mb
Page of 25
Display

Download Sharp DM-2000 Handy Guide

Here you can read online and download Sharp DM-2000 Handy Guide in PDF. DM-2000 handy guide will guide through the process and help you recover, restore, fix, disassemble and repair Sharp DM-2000 Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.

Found More:

DM-2000 Service Manuals

Preview DownloadPagesSize
GDM-2000TC Service Manual 29 1.22 MB
DM-2000 (serv.man3) DM2000 Service Manual-General Specifications Service Manual 12 179.37 KB
DM-2000 (serv.man4) DM2000 Service Manual-Consumable Parts External Views Internal Structures Service Manual 9 441.4 KB
DM-2000 (serv.man5) DM2000 Service Manual-Unpacking Installation Adjustments Service Manual 16 669.84 KB
DM-2000 (serv.man6) DM2000 Service Manual-Simulations Flash Rom Version Up Procedure Service Manual 14 208.81 KB
DM-2000 (serv.man7) DM2000 Service Manual-Trouble Code List User Setup Service Manual 15 272.12 KB
DM-2000 (serv.man8) DM2000 Service Manual-Disassembly Assembly Electrical Section Service Manual 18 1.69 MB
DM-2000 (serv.man10) DM2000-Operation Manual Part1 User Guide / Operation Manual 28 880.59 KB
DM-2000 (serv.man11) DM2000-Operation Manual Part2 User Guide / Operation Manual 10 406.13 KB
DM-2000 (serv.man12) DM2000-Operation Manual Part3 User Guide / Operation Manual 18 216.41 KB
DM-2000 (serv.man13) DM2000-Operation Manual Part4 User Guide / Operation Manual 28 487.6 KB
DM-2000 (serv.man9) Parts guide Parts Guide 39 2.01 MB
DM-2000 (serv.man2) DM2000 Specifications Specification 8 79.97 KB
DM-2000 (serv.man20) Manual paper feed roller material change. Technical Bulletin 5 342.3 KB
DM-2000 (serv.man21) MATERIAL CHANGE PAPER FEED SHEET Technical Bulletin 4 354.66 KB
DM-2000 (serv.man22) Attachment of a high temperature Caution Label. Technical Bulletin 2 108.07 KB
DM-2000 (serv.man23) Countermeasure against peeling of the fusing front PG sheet Technical Bulletin 2 46.93 KB
DM-2000 (serv.man24) Countermeasure against paper jam when ejecting Technical Bulletin 2 92.8 KB
DM-2000 (serv.man25) Countermeasure against U2-40 trouble due to power supply noise. Technical Bulletin 1 1.08 MB
DM-2000 (serv.man26) CHANGE OF PARTS (Base Plate Unit 2 Delivery Frame Unit MCU PWB) Technical Bulletin 1 26.04 KB
DM-2000 (serv.man27) Countermeasure against paper jam due to deformation of the fusing upper paper guide sheet. Technical Bulletin 2 47.77 KB
DM-2000 (serv.man28) Countermeasure against skewing due to gap in Tray Guide R Technical Bulletin 2 185.54 KB
DM-2000 (serv.man29) Information of parts change Technical Bulletin 2 791.29 KB
DM-2000 (serv.man30) Part number for Panther-series Power Switch Technical Bulletin 1 11.12 KB
DM-2000 (serv.man31) New supply of EEPROM for service Technical Bulletin 1 7.19 KB
DM-2000 (serv.man32) Change to shape of rear plate to prevent dislocation Technical Bulletin 1 183.36 KB
DM-2000 (serv.man33) Countermeasure against manual feed paper jams, due to contamination of drive section Technical Bulletin 2 278.17 KB
DM-2000 (serv.man34) Improved durability of cam transmission arm in manual paper feed unit Technical Bulletin 1 13.01 KB
DM-2000 (serv.man35) Countermeasure against breakage of the fusing rear paper guide rib Technical Bulletin 1 115.91 KB
DM-2000 (serv.man36) Countermeasure against breakage of the discharge holder claw Technical Bulletin 1 93.76 KB
DM-2000 (serv.man37) Countermeasure against paper jam when ejecting paper Technical Bulletin 1 70.95 KB
DM-2000 (serv.man38) Countermeasure against F1-06 errors Technical Bulletin 1 54.34 KB
DM-2000 (serv.man39) Countermeasure for duplex print problem in PCL firmware version 4.53 Technical Bulletin 1 10.96 KB
DM-2000 (serv.man40) Parts change information for PS transport roller Technical Bulletin 1 13.26 KB
DM-2000 (serv.man41) Countermeasure for black stripes when using SPF, and for occurrence of E7-04 error message Technical Bulletin 2 37.59 KB
DM-2000 (serv.man42) Countermeasure against skewing when feeding from cassette Technical Bulletin 1 20.88 KB
DM-2000 (serv.man43) Design of feeding rollers is changed to improve quality of paper feeding Technical Bulletin 2 52.57 KB
DM-2000 (serv.man44) Information of parts change (MCU PWB) Technical Bulletin 1 16.99 KB
DM-2000 (serv.man45) Information of parts change (document feed) Technical Bulletin 1 12.83 KB
DM-2000 (serv.man46) Correction of E7-04 error Technical Bulletin 1 12.2 KB
DM-2000 (serv.man47) Parts change information (paper feeding unit process unit side door unit) Technical Bulletin 2 53.14 KB
DM-2000 (serv.man48) Countermeasure against right door detection error Technical Bulletin 1 951.49 KB
DM-2000 (serv.man49) Update to the PCL firmware (Version 4.53) Technical Bulletin 1 15.13 KB
DM-2000 (serv.man50) New supply of a service part (paper feed roller rubber) Technical Bulletin 1 12.42 KB
DM-2000 (serv.man51) Countermeasure against abnormal noise from the 2nd transport clutch Technical Bulletin 1 33.05 KB
DM-2000 (serv.man52) Version change of the maintenance (firmware download) software Technical Bulletin 1 13.34 KB
DM-2000 (serv.man53) Parts change information (MCU PWB) Technical Bulletin 1 12.86 KB
DM-2000 (serv.man54) Increase of power supply margin on PWB due to change of fuse Technical Bulletin 1 394.48 KB
DM-2000 (serv.man55) Change of cassette lock claws Technical Bulletin 1 23.33 KB
DM-2000 (serv.man56) New supply of service part Technical Bulletin 1 23.98 KB
DM-2000 (serv.man57) Reducing white stripes on the CRU unit Technical Bulletin 1 21.37 KB
DM-2000 (serv.man58) Parts change information Technical Bulletin 2 530.63 KB
DM-2000 (serv.man59) Information about the part code of the delivery frame Technical Bulletin 1 21.89 KB
DM-2000 (serv.man60) Parts change information Technical Bulletin 2 205.19 KB
DM-2000 (serv.man61) New supply of fusing unit adding a cleaning felt AS Technical Bulletin 1 21.57 KB
DM-2000 (serv.man62) Parts change Technical Bulletin 1 21.48 KB
DM-2000 (serv.man63) New supply of a service part described in AR161 200 ref 079 Technical Bulletin 1 23.38 KB
DM-2000 (serv.man64) Software version upgrade of the main ROM for simplex models (Correction of jam detection error in special conditions) Technical Bulletin 1 22.59 KB
DM-2000 (serv.man65) Countermeasure against folding of the corner of copying paper on duplex print Technical Bulletin 1 40.57 KB
DM-2000 (serv.man66) Countermeasure against oblique feed of the cassette Technical Bulletin 1 33.04 KB
DM-2000 (serv.man67) Countermeasure against soiling of upper heat roller. Technical Bulletin 2 111.82 KB
DM-2000 (serv.man68) Parts change. Technical Bulletin 3 117.18 KB
DM-2000 (serv.man69) Support of double feed during cassette paper feed and document double feed. Technical Bulletin 4 203.74 KB
DM-2000 (serv.man70) Countermeasure against L4-01 (main motor lock) and paper jam. Technical Bulletin 2 345.54 KB
DM-2000 (serv.man71) Change of the toner motor (toner not supplied). Technical Bulletin 1 64.13 KB
DM-2000 (serv.man72) Countermeasure against job separator home position detection error. Technical Bulletin 2 99.41 KB
DM-2000 (serv.man73) Improvement of the manual paper feeding tray lock. Technical Bulletin 1 101.53 KB
DM-2000 (serv.man74) Application of grease to the paper feed cassette rail. Technical Bulletin 1 100.08 KB
DM-2000 (serv.man75) Countermeasure against breakage of the 2nd gear teeth. (WHITE) Technical Bulletin 2 87.63 KB
DM-2000 (serv.man76) Parts change for the productivity improvement. (WHITE) Technical Bulletin 2 83.92 KB
DM-2000 (serv.man77) Version upgrade of the PCL firmware. (WHITE) Technical Bulletin 2 84.18 KB
DM-2000 (serv.man78) Caution when replacing the MCU. (WHITE) Technical Bulletin 1 60.5 KB
DM-2000 (serv.man79) Version upgrade of the main body software. (Update to ref.067)(WHITE) Technical Bulletin 1 63.37 KB
DM-2000 (serv.man80) Change of the operation instruction label. (WHITE) Technical Bulletin 2 102.54 KB
DM-2000 (serv.man81) Version upgrade of the main body software. (WHITE) Technical Bulletin 1 36.39 KB
DM-2000 (serv.man82) Change of the operation instruction label. (WHITE) Technical Bulletin 2 72.15 KB
DM-2000 (serv.man83) Change of the shifter gear (50T). Technical Bulletin 2 62.9 KB
DM-2000 (serv.man84) Change of the LSU unit. (WHITE) Technical Bulletin 1 48.88 KB
DM-2000 (serv.man85) Parts change of the fusing unit. (WHITE) Technical Bulletin 1 49.83 KB
DM-2000 (serv.man86) Supply of the paper feed roller as a service part. (WHITE) Technical Bulletin 1 126.36 KB
DM-2000 (serv.man87) Material change of the fusing gear (45T). (WHITE) Technical Bulletin 1 89.86 KB
DM-2000 (serv.man88) Version upgrade of the software of the main body. (WHITE) Technical Bulletin 1 102.22 KB
DM-2000 (serv.man89) About the expanded memory. (WHITE) Technical Bulletin 2 109.01 KB
DM-2000 (serv.man90) 1.Change of the packing material. 2.Correction of the parts guide. 3.Addition of an original caution label. (WHITE) Technical Bulletin 2 143.62 KB
DM-2000 (serv.man91) Developer Unit Improvement To Correct Clearance Between MX Roller Shaft And Shaft Bearing. (WHITE) Technical Bulletin 2 89.22 KB
DM-2000 (serv.man92) Change Of The Photoconductor.(WHITE) Technical Bulletin 1 61.61 KB
DM-2000 (serv.man93) Fax Kit Problems. (WHITE) Technical Bulletin 2 74.09 KB
DM-2000 (serv.man94) 1.Change Of The LSU Unit. 2.Change Of The Lamp Base Plate. 3.Change Of The LCD Spacer. (WHITE) Technical Bulletin 2 76.86 KB
DM-2000 (serv.man95) 1.Version Upgrade Of The CDROM. 2.Version Upgrade Of The PCL Firmware. 3.Release Of The Fax Program. 4.Parts Change For Better Productivity. 5.Supply Of Expanded Memory For The PCL PWB. (WHITE) Technical Bulletin 3 74.52 KB
DM-2000 (serv.man96) Noisy Laser Unit. (WHITE) Technical Bulletin 1 58.08 KB
DM-2000 (serv.man97) Correction To The Parts Guide. (WHITE) Technical Bulletin 2 79.58 KB
DM-2000 (serv.man98) (Revision to reference 042) 1.Change Of The Fusing Lower Frame. 2.Change Of The SPF Rack Cover. 3.Countermeasure Against Poor Insertion Of The Motherboard Connector. 4.Change Of The Rubber Cushion. (WHITE) Technical Bulletin 3 85.3 KB
DM-2000 (serv.man99) Change Of The DV Sheet. (WHITE) Technical Bulletin 1 75.22 KB
DM-2000 (serv.man100) Change Of The Default Values. (WHITE) Technical Bulletin 1 66.59 KB
DM-2000 (serv.man101) Satisfaction Of Energy Star. (WHITE) Technical Bulletin 2 70.72 KB
DM-2000 (serv.man102) 1.Change Of The SPF Glass Sheet R. 2.Dimensions Change Of The PS Transport Roller. 3.Material Change Of The Copy Operation PWB. (WHITE) Technical Bulletin 3 92.51 KB
DM-2000 (serv.man103) 1.Shape Change Of The OP PWB Shield And Addition Of A Shield Plate Card. 2.Shape Change Of The Copy Lamp Unit. 3.Disuse Of The Sub Blade Earth Plate. (WHITE) Technical Bulletin 2 67.57 KB
DM-2000 (serv.man104) Version Upgrade Of The Main Body Software. (WHITE) Technical Bulletin 1 61.42 KB
DM-2000 (serv.man105) Parts Change For Better Productivity. (WHITE) Technical Bulletin 2 68.55 KB
DM-2000 (serv.man106) 1.Change Of The Fusing Lower Frame. 2.Change Of the SPF Rack Cover. 3.Countermeasure Against Poor Insertion Of The Motherboard Connector. 4.Change Of The Rubber Cushion. (WHITE) Technical Bulletin 3 85.16 KB
DM-2000 (serv.man107) Increase Of Strength Of The Fusing Gear. (WHITE) Technical Bulletin 1 62.33 KB
DM-2000 (serv.man108) Mounting The Dehumidifying Heater In The Optical Unit On The Market. (WHITE) Technical Bulletin 4 221.25 KB
DM-2000 (serv.man109) 1.Countermeasure Against Abnormal Noise. 2.Countermeasure Against Shifter Operation Error. 3.Shape Change Of The Cooling Fan Duct. (WHITE) Technical Bulletin 3 79.4 KB
DM-2000 (serv.man110) 1.Change Of The Operation Panel Exterior. 2.Screw Change. (WHITE) Technical Bulletin 2 70.13 KB
DM-2000 (serv.man111) Software Version Update Of The Main Body. (WHITE) Technical Bulletin 1 61.72 KB
DM-2000 (serv.man112) Parts Change For Better Productivity. (WHITE) Technical Bulletin 2 71.5 KB
DM-2000 (serv.man113) 1.Change Of The Discharge Holder. 2.Shape Change Of The Copy Key. 3.Addition Of the Harness Protection Sheet. (WHITE) Technical Bulletin 2 85.08 KB
DM-2000 (serv.man114) Parts Change For Better Productivity. (WHITE) Technical Bulletin 2 70.16 KB
DM-2000 (serv.man115) Corrections To The Service Manual. (WHITE) Technical Bulletin 1 130.4 KB
DM-2000 (serv.man116) Addition To The Service Manual. (WHITE) Technical Bulletin 1 65.16 KB
DM-2000 (serv.man117) 1.Shape Change Of Fusing Cover. 2.Countermeasure Against Abnormal Noise. (WHITE) Technical Bulletin 2 79.68 KB
DM-2000 (serv.man118) Disuse Of Screws. (WHITE) Technical Bulletin 2 130.02 KB
DM-2000 (serv.man119) 1.Change Of Harness Treating Method. 2.Shape Change Of Separator Lever F. (WHITE) Technical Bulletin 2 114.22 KB
DM-2000 (serv.man120) Parts Change For Better Productivity. (WHITE) Technical Bulletin 2 82 KB
DM-2000 (serv.man121) 1.Shape Change Of Rear Exterior. 2.Shape Change Of MCU Fixing Plate. 3.Shape Change Of Sensor Fixing Plate And Optical Base Plate. (WHITE) Technical Bulletin 2 71.74 KB
DM-2000 (serv.man122) 1.Change Of 3-Terminal Regulator. 2.Change Of Corner Frame R Re-inforce Plate. 3.Shape Change Of Delivery Tray. (WHITE) Technical Bulletin 2 70.89 KB
DM-2000 (serv.man123) Corrections To The Service Manual. (WHITE) Technical Bulletin 2 280.47 KB
DM-2000 (serv.man124) 1.Change Of Delivery Earth Spring A. 2.Disuse Of Fusing Front PG Adjusting Shaft. 3.Shape Change Of Base Plate Rail R. (WHITE) Technical Bulletin 2 71.6 KB
DM-2000 (serv.man125) 1.Shape Change Of DMC Actuator. 2.Change Of Front Cabinet. 3.Disuse Of Screws. (WHITE) Technical Bulletin 4 557.37 KB
DM-2000 (serv.man126) New Supply Of Process Sub-unit. (WHITE) Technical Bulletin 2 65.11 KB
DM-2000 (serv.man127) Countermeasure For Envelopes Postcards Feeding Failure Problem. (WHITE) Technical Bulletin 2 79.75 KB
DM-2000 (serv.man128) Shape Change Of Pipe Shutter. (WHITE) Technical Bulletin 1 36.68 KB
DM-2000 (serv.man129) Correction To The Parts Guide. (WHITE) Technical Bulletin 1 76.03 KB
DM-2000 (serv.man130) Countermeasure Against Jam By Catching Thin Paper In The Drum. (WHITE) Technical Bulletin 2 61.84 KB
DM-2000 (serv.man131) Countermeasure Against The Improper Movement Of ARTR2 (Job Separator). (WHITE) Technical Bulletin 2 95.25 KB
DM-2000 (serv.man132) 1.Change Of TC BC Interface Electrode Spring. 2.Change Of MCU PWB Parts. 3.Change Of Mirror Motor. (WHITE) Technical Bulletin 2 27.21 KB
DM-2000 (serv.man133) 1.Correspondance To EMI. 2.Change Of PS Roller Shaft. 3.Shape Change Of DMC Actuator. 4.Addition Of Front Cover Label. (WHITE) Technical Bulletin 1 25.54 KB
DM-2000 (serv.man134) Change Of Reverse Gate. (WHITE) Technical Bulletin 1 23.5 KB
DM-2000 (serv.man135) 1.Prevention Against Vibration Of Job Separator. 2.Shape Change Of Separator Lever R. 3.Shape Change Of Full Detection Lever. (WHITE) Technical Bulletin 1 26.12 KB
DM-2000 (serv.man136) 1.Countermeasure Against Vertical Stripes. 2.Dry Heater Change. 3.Prevention Against Disengagement Of Bearing Due To Deformation Of Delivery Earth Plate. 4.Countermeasure Against White Stripes In The Halftone Mode. 5.Change Of LED On The Operation PWB. (WHITE) Technical Bulletin 2 41.14 KB
DM-2000 (serv.man137) F5-02 Change Of Connector To That With Slider. (WHITE) Technical Bulletin 1 22.94 KB
DM-2000 (serv.man138) Parts Guide Correction. (WHITE) Technical Bulletin 1 23.02 KB
DM-2000 (serv.man139) Supply Of Service Unit For The Process Unit. (WHITE) Technical Bulletin 2 57.81 KB
DM-2000 (serv.man140) Correction Of The Flash Rom Version Update (Issue of No.2.03). (WHITE) Technical Bulletin 3 470.4 KB
DM-2000 (serv.man141) Update Of The Software Version Due To Release Of The Option Electronics Sort Board. (WHITE) Technical Bulletin 3 473.83 KB
DM-2000 (serv.man142) Update Of The Software Version Due To Release Of The Option Printer Board. (WHITE) Technical Bulletin 3 688.27 KB
DM-2000 (serv.man143) Supply Of Individual Parts Of Copy Lamp Unit. (WHITE) Technical Bulletin 2 61.58 KB
DM-2000 (serv.man144) Correction Of The Flash ROM Version Upgrade. (WHITE) Technical Bulletin 3 684.88 KB
DM-2000 (serv.man145) Correction To The Parts Guide. (WHITE) Technical Bulletin 1 18.52 KB
DM-2000 (serv.man146) Version 4.10 Firmware (Sent out as FF COP 0890 Technical Bulletin 1 10.36 KB
DM-2000 (serv.man147) Flash Upgrade Procedure (Sent out as FF COP 085)(Originally written for AR161 200 only). Technical Bulletin 3 325.04 KB
DM-2000 (serv.man14) AR161 200 DM2000-Firmware for coin vendor Ver7.05 Driver / Update 243.42 KB
DM-2000 (serv.man15) DM2000-Firmware Version 5.32. Please refer to Firmware revision table for details. Driver / Update 240.77 KB
DM-2000 (serv.man16) DM2000-Firmware Version 5.29 Driver / Update 236.8 KB
DM-2000 (serv.man17) Version 3.1 CD printer drivers for Windows 3.1 3.11. Includes drivers for PCL5e Postscript. Driver / Update 2.06 MB
DM-2000 (serv.man18) Version 3.1 CD printer drivers for Windows NT4. Includes drivers for PCL5e, PCL6, Postscript. Driver / Update 1.96 MB
DM-2000 (serv.man19) Version 3.1 CD printer drivers for Windows 95 98. Includes drivers for PCL5e, PCL6, Postscript. Driver / Update 3.13 MB
DM-2000 (serv.man148) MSDS F-00841 Regulatory Data 2 12.59 KB
DM-2000 (serv.man149) MSDS F-30841 Regulatory Data 2 11.41 KB
DM-2000 (serv.man150) Environmental Data Sheet Regulatory Data 1 4.49 KB

Random: