Read Sharp DM-2000 (serv.man8) Service Manual online
A. Fusing unit
B. Thermostat
C. Thermistor
Installation: Check that the thermistor is in contact with the upper heat
roller.
D. Heater lamp
Assembly: Insert the spring (A) into the hole (B) in the fusing frame.
Assembly: Put the paper guide earth spring (A) under the paper guide
(B) before fusing.
Disassembly: There are three pawls on the fusing cover. Remove the
screws and slide the fusing cover to the right to remove.
The heater lamp is fixed on the fusing cover with a
screw. Slide the fusing cover to the front and remove
the screw, then remove the heater lamp.
The heater lamp is fixed on the fusing cover with a
screw. Slide the fusing cover to the front and remove
the screw, then remove the heater lamp.
( 2 )
( 3 )
( 1 )
( 1 )
( 2 )
( 3 )
( 1 )
( 1 )
( 2 )
( 1 )
(A)
(B)
(2)
(1) (2)
(3)
(4)
(3)
(B)
(A)
DM-2000
11 – 3
Click on the first or last page to see other DM-2000 (serv.man8) service manuals if exist.