Read Sharp DM-2000 (serv.man8) Service Manual online
B. Copy lamp unit
Disassembly: Be sure to put No. 2/3 mirror unit to the positioning plate
(A).
Assembly:
Put the notched surface of wire holder (3) downward,
tighten temporarily, and install.
tighten temporarily, and install.
Adjustment:
Main scanning direction distortion balance adjustment
C. Copy lamp
D. Lens unit
( 2 )
( 3 )
( 2 )
( 3 )
( 1 )
( A )
( A )
( 4 )
( 4 )
( 5 )
( 6 )
( 4 )
( 5 )
( 3 )
( 1 )
( 1 )
( 2 )
Lens unit attachment reference
Attach the lens unit so that the lens unit number on the lens ad-
justment plate is aligned with the scribe line on the base plate.
Attach the lens unit so that the lens unit number on the lens ad-
justment plate is aligned with the scribe line on the base plate.
Example: Lens unit number –2.8
Attach the lens unit at 2 scales in the paper exit direc-
tion from the reference line.
tion from the reference line.
Note: Never touch the other screws than the unit attachment
screw.
The lens unit is supplied only in a whole unit.
The lens unit is supplied only in a whole unit.
3. Fusing section
No.
Contents
A
Fusing unit
B
Thermostat
C
Thermistor
D
Heater lamp
E
Upper heat roller
F
Upper heat roller separation pawl
G
Lower heat roller
H
Lower heat roller separation pawl
DM-2000
11 – 2
Click on the first or last page to see other DM-2000 (serv.man8) service manuals if exist.