CALLISTO V2 (serv.man8). Using the Callisto Version 2 Configuration Manager - Sharp Copying Equipment User Guide / Operation Manual. Page 22

This section of the document describes the commands available from the Main Menu
giving detailed information about each and how they relate to each other. Some of the
commands are reflected on the Popup Menus and where this is the case, the commands
will operate in the same way. Several of the commands will be enabled/disabled at
different times depending on the selection made on the interface. Where necessary,
examples will be given to assist in the explanation.

For each shared printer on the server, this option creates a output queue for  the input
queue. The output queue name is denoted with the 'Real_' pre-fix. This option also maps
the input and output in the Callisto View.

This command presents a dialog. The dialog consists of four text entry boxes. These are :-

Domain Name – This displays the name of domain where Callisto is installed.

Server Name – This displays the name of the WorkStation or Server where Callisto is
installed.

Serial Number -  Here the Network Administrator enters the Serial Number. This is
generally on the CD cover that Callisto is shipped with

Licensed To – Enter the name of the Company or Organisation who has purchased
Callisto.

Authentication Code - where the user will enter the required Authentication Code and the
person (or business) to which Callisto has been licensed. The Authentication Code is
required so this installation of Callisto can be validated. The unlicensed period will last
only 30 days. After this Callisto will not be usable.

Will shut down Callisto prompting a dialog if any changes have been made to the settings.
There are three options buttons shown on the dialog and are Yes, No and Cancel. Yes will
save the changes and then close Callisto down. No will close Callisto without saving and
Cancel will clear the dialog and leaving Callisto running.