Read Sharp AR-RP9 Service Manual online
AR-RP9/SP9/AR-D33 DISASSEMBLY AND ASSEMBLY 5 - 8
1) Remove the shaft.
2) Remove the paper feed roller.
3) Remove the bearing and the spring.
1) Remove the pick-up roller.
2) Remove the gear.
C. Paper exit roller
1) Remove four gears.
2) Remove two screws.
3) Remove the frame.
1) Remove the E-ring.
2) Remove the bearing.
3) Remove the paper guide unit.
4) Remove the paper exit roller.
D. Set sensor, scan front sensor
1) Remove the set sensor.
2) Remove the scan front sensor.
3) Disconnect the connectors.
* When assembling, attach the blue harness to the marking B side
of the sensor, and attach the orange harness to the opposite side
sensor.
sensor.
1)
2)
3)
1)
2)
1)
2)
2)
3)
1)
1)
3)
2)
4)
1)
3)
3)
2)
B
Click on the first or last page to see other AR-RP9 service manuals if exist.