Read Sharp AR-PE3 (serv.man8) User Guide / Operation Manual online
6
Quick Start Guide
Preparing to print
To set up your Fiery X3e, you must perform the following tasks:
• Connect the Fiery X3e physically to a functioning network.
• Configure the network server.
• Set up the Fiery X3e from the Control Panel.
• Prepare client workstations for printing.
A brief explanation of each task follows.
Connecting the Fiery X3e to a functioning network
When you add the Fiery X3e to a network, it is assumed that a network administrator
has already installed a network cabling system and has connected workstations and
servers. For examples of different networks, see the
has already installed a network cabling system and has connected workstations and
servers. For examples of different networks, see the
Configuration Guide
. After a
network node has been prepared for the Fiery X3e, and the cable has been routed to a
location where the Fiery X3e will be installed (near the copier/printer), follow the
procedure below.
location where the Fiery X3e will be installed (near the copier/printer), follow the
procedure below.
T
O
PREPARE
FOR
F
IERY
X3
E
CONFIGURATION
1.
Print a Test Page from the Fiery X3e Control Panel.
To print a Test Page, press the Menu button on the Control Panel to access the
Functions menu. Choose Print Pages, and then choose Test Page.
Functions menu. Choose Print Pages, and then choose Test Page.
2.
With both the copier/printer and the Fiery X3e turned off, connect the network cable
to the Fiery X3e.
to the Fiery X3e.
The network should be installed and operational.
3.
Turn on the copier/printer and the Fiery X3e.
Click on the first or last page to see other AR-PE3 (serv.man8) service manuals if exist.