AR-PE3 (serv.man8). ARPE3-Quick Start Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 15

 

If you require a network server, you must configure that server to provide client access 
to the Fiery X3e as a color printer. To configure a network server in a Windows or 
UNIX network environment, see the 

 

. For Novell and Windows 

(using TCP/IP) networks, the network servers must be configured for printing to the 
Fiery X3e before you configure Fiery X3e network settings in Setup. For more 
information, see the 

 

 

Setup configures the Fiery X3e to communicate with other devices and manage print 
jobs. You must perform Setup the first time you turn on the Fiery X3e after new 
system software is loaded, or any time Server software is reinstalled. Initial Setup must 
be performed at the Fiery X3e Control Panel. 

Perform the following Setup options in the order listed:

•

 

—specifies system options.

•

 

—specifies all the active network systems that transmit print jobs to 

the Fiery X3e.

•

 

—specifies how print jobs and queues are managed.

 

This is the minimum setup required to enable your Fiery X3e to begin printing. 

To configure network settings in Setup, you need a live network connection so the 
Fiery X3e can query the network for zones, servers, and server-based queues.

To perform Setup from the Control Panel, select one menu after another and enter 
information about your Fiery X3e and your network and printing environment. In 
each Setup screen, the last line of the display shows the name of the current Setup 
menu. Most of the menus you see are displayed on the Control Panel Map, as a flow 
chart you can print from the Control Panel.