Read Sharp AR-PE1 (serv.man39) Technical Bulletin online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 024.doc
Page: 2 of 4
Action Performed by the ARPE1 Fiery Controller during a CD System Software Installation
Start Time For each
Action
(Minutes)
Action Being Performed
ARPE1 LCD Panel Display
Connected Monitor Display
Insert the System Software CD in to the ARPE1 and re-boot the
ARPE1.
Select Yes and click the button next to OK.
All data will be deleted. Continue ? Yes/No
Starting MS-DOS
0
A Ghost Image is copied from the CD to the ARPE1 hard disk.
Installing
Ghost software displays that a ghost image is being loaded on to the ARPE1
8
The ARPE1 automatically reboots itself.
Starting MS-DOS
9
Interrupts / hardware / and memory are tested at re-boot and then the
specific Fiery files are copied onto the ARPE1hard disc.
Copying Files
The Z:\fiery\data.z file and others are copied to the ARPE1 hard disc.
11
Remove the CD and power off/on the ARPE1.
To complete the install. Remove the CD and recycle the power.
C:\
12
Interrupts / hardware / and memory are tested at re-boot and then the
“D” drive is checked for any errors by the NT Operating system
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
13
The ARPE1 automatically reboots itself.
14
Interrupts / hardware / and memory are tested at re-boot and then the
“E” drive is checked for any errors by the NT Operating system
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
19
The specific Fiery/ARC150 files that were loaded on to the ARPE1
hard drive above are now uncompressed and setup.
Initialising System
The NT Logo is displayed and then the setup of the Fiery ARC150 specific
software is displayed.
20
The ARPE1 automatically reboots itself.
21
Interrupts / hardware / and memory are tested at re-boot.
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
29
A Backup Ghost Image is now copied from the hard drive to a separate
partition on the ARPE1 hard disc.
Creating System Backup
Ghost software displays that the backup image is being loaded on to the ARPE1
hard disc. (The ghost image software runs twice).
30
The ARPE1 automatically reboots itself.
Interrupts / hardware / and memory are tested at re-boot.
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
X4 Background is displayed and CTRL-ALT-Delete for logon.
Loading
31
The NT System boots to a logon screen and updates the system.
Updating System
Service Control Manager highlights that a service has failed to load.
32
The ARPE1 automatically reboots itself.
33
Interrupts / hardware / and memory are tested at re-boot.
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
34
The ARPE1 system software is now installed and the ARPE1 will be in
an idle ready condition.
Idle
Fiery X4 Background Picture
Click on the first or last page to see other AR-PE1 (serv.man39) service manuals if exist.