Read Sharp AR-PE1 (serv.man13) User Guide / Operation Manual online
2
Installing User Software on a Windows Computer
Downloading printer files with the Installer WebTool
You can download printer drivers and printer files from the Fiery X4 with the Installer
WebTool (if the site administrator has enabled Internet access to the Fiery X4). For
instructions, see “Using the Installer WebTool” on page 90. Once you download the
printer files, the installation process is identical to installing from the User
Software CD.
WebTool (if the site administrator has enabled Internet access to the Fiery X4). For
instructions, see “Using the Installer WebTool” on page 90. Once you download the
printer files, the installation process is identical to installing from the User
Software CD.
Setting up PostScript printing with Windows 95/98
To set up the Fiery X4 as a PostScript printer you must install the PostScript printer
driver for Windows 95/98 and its corresponding printer description files. You must
also configure a particular type of print connection between the workstation and the
Fiery X4.
driver for Windows 95/98 and its corresponding printer description files. You must
also configure a particular type of print connection between the workstation and the
Fiery X4.
The procedure below describes installing the printer drivers from the User
Software CD or from the Installer WebTool. The procedures after that describe setting
up the print connection.
Software CD or from the Installer WebTool. The procedures after that describe setting
up the print connection.
If you are printing using SMB (Server Message Block) you can connect to the Fiery X4
and install the printer drivers in a single procedure. To configure the Fiery X4 for SMB
printing, see “Setting up SMB printing with Windows 95/98” on page 10.
and install the printer drivers in a single procedure. To configure the Fiery X4 for SMB
printing, see “Setting up SMB printing with Windows 95/98” on page 10.
T
O
INSTALL
THE
P
OST
S
CRIPT
PRINTER
DRIVER
FOR
W
INDOWS
95/98:
1.
Click Start, choose Settings, and then choose Printers to display the Printers window.
2.
Double-click the Add Printer icon, and click Next.
3.
Specify if you are printing using a Local or a Network printer, and click Next.
Click on the first or last page to see other AR-PE1 (serv.man13) service manuals if exist.