Read Sharp AR-PE1 (serv.man13) User Guide / Operation Manual online
xvi
Introduction
• A TCP/IP enabled network and the IP address or DNS name of the Fiery X4
• Web Services enabled on the Fiery X4
UNIX (TCP/IP)
To print to the Fiery X4 with a UNIX workstation, you need:
• A workstation with standard TCP/IP connectivity (for example, Sun SPARCStation
or Silicon Graphics workstation with Solaris version 2.x, 7.x, or SunOS version 4.1.x
software)
software)
• TCP/IP printing software that conforms to RFC1179 (Berkeley lpd protocol)
IPX (Novell)
To use the Fiery X4 with an IPX (Novell) network, you need:
• A Novell server
• Novell NetWare software version 3.x, or 4.x
• Support for Ethernet SNAP, Ethernet II, Ethernet 802.3, Ethernet 802.2,
Token Ring SNAP, or Token Ring
Command WorkStation
To run the Command WorkStation application from a remote workstation, you need:
• A Windows-based computer with a 200MHz Pentium processor
• Windows 95/98, or Windows NT 4.0 with NT Service Pack 5
• TCP/IP networking protocol installed
• A video adapter card with at least 2MB of video memory
• At least 32MB of RAM
• An 850MB (or greater) hard disk drive
• A 2
x
CD-ROM drive
• A 17" monitor that supports 16-bit color at a minimum resolution of 1024
x
768
Click on the first or last page to see other AR-PE1 (serv.man13) service manuals if exist.