Read Sharp AR-P16 (serv.man3) Service Manual online
AR-P16 SETUP 3 - 1
[3] SETUP
<Before installation>
• Ensure that the DATA indicator on the operation panel is neither lit
nor blinking, and then start the installation procedure.
• When installing AR-HD4 (HDD expansion unit), read this installation
manual for installing the unit.
• When installing AR-NC5J (print server card), read this installation
manual for installing the card.
• For improvement of workability, part of the description in this manual
may be modified without prior notice. In this case, refer to the service
manual.
manual.
1) Turn off the main switch of the main unit.
Turn the main switch located on the left side of the main unit to the
"OFF" position.
"OFF" position.
If the machine is equipped with a facsimile unit, also turn off the
FAX power switch.
FAX power switch.
Then remove the power plug from the outlet.
2) Remove the printer controller slot cover.
(The removed cover is not used any more.)
3) Disconnect the connector of the cooling fan harness.
4) Remove the cooling fan from the printer controller slot cover, and
attach it to the printer controller unit chassis.
• Cooling fan removal
• Cooling fan installation
"OFF"
"OFF"
Remove the fixing screws.
Remove the fixing screws.
Disconnect
the connector.
the connector.
Disengage two hooks
of the resin holder.
of the resin holder.
Insert the rib into the
chassis hole to attach.
chassis hole to attach.
Fix with two hooks.
Click on the first or last page to see other AR-P16 (serv.man3) service manuals if exist.