AR-NS1 (serv.man3). Network Scanner Tool User Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 23

Network Scanner Tool User’s Guide

•

  Automatically detect Sharp copiers connected to the network

•

  Use Web Setup pages of the Sharp copier or Axis server to change configuration values.

•

  Enable/disable a copier (by checking its box)

To add a new copier, simply click on the New button of the Copiers tab. This brings up the Copier
Properties screen that lets you add a copier. If you select a copier that was automatically detected
by the Network Scanner Tool, then an IP address appears in the Copier Properties screen. If you
wish to add a copier that was not automatically detected, you will have to enter the correct IP
address or Host Name for that copier.

After adding a new copier, click on the OK button so all process settings immediately take effect.

The following options are available from the Copier Properties screen.

Use IP Address

If you are configuring a copier that was not automatically detected by the Network Scanner
Tool, you will need to enter either the IP address of the copier (or Axis unit) or the host name
in the appropriate field. When the IP address is determined either by direct entry or host
lookup, the Network Scanner Tool verifies that the IP address is assigned to a Sharp copier.

If your network operates under the Simple Addressing or Regular DHCP policies described in
Chapter 2, we recommend ‘Use IP Address’ to identify the copier. IP addresses are available
from the PRINT CONFIGURATION PAGE or the Network Administrator.  Refer to the AR-
NS1 Network Scanner Operation Manual for information on accessing the PRINT
CONFIGURATION PAGE.