Read Sharp AR-NC5J (serv.man7) User Guide / Operation Manual online
5-12
Using in Macintosh Environment
Print Server Card
Users Manual
Print Server
Print Server Setup
File server to be connected:
Set the name of the file server primarily connected. Print Server Card logs into the
file server set here when operating in print server mode. Print Server Card searches
the file server automatically and logs in if the value is blank.
Password:
Set the password that is authenticated when Print Server Card logs into the file
server as a print server. When the password is set for Print Server Card, the same
password must be set to the corresponding file server. If Print Server Card is
connected to two or more file servers, the same password must be set to all the file
servers.
Job Polling Time:
Set the interval for Print Server Card to query the file server for jobs in units of
seconds. Usually the value should be the default.
NDS Setup
Bindery Mode:
Enable or disable bindery mode. When disabled, only NDS mode operates. Do not
disable except when only NDS mode is needed.
NDS Tree:
Specify the name of the NDS tree connected. Because the tree name is obtained
automatically, it is usually unnecessary to specify it here. When there are two or
more trees on the same network it is necessary to specify the name here.
NDS Context:
Specify the NDS context connected in print server mode. The context which created
the print server on the file server should be specified here.
Click on the first or last page to see other AR-NC5J (serv.man7) service manuals if exist.