Read Sharp AR-NC5J (serv.man5) User Guide / Operation Manual online
7-10
Print Server Card User Software
Print Server Card
Users Manual
2.
After selecting
Setup - IP Address
Setup, IP Address Setup utility
starts. Assign an IP Address and
click on
OK.
3.
Restart the printer to enable the
configuration of IP Address.
Configure IP Address Manually
This section explains how to set IP address to Print Server Card.
* Refer to the Ethernet address of the Print Server Card in advance. Ethernet address is 6
sets of the hexadecimal two digit number written on Print Server Card.
(Ex. : 00.80.92.00.13.67)
Example of IP address setup by NICManager below.
1. Select the Print Server Card you will configure using NICManager from the list. If there are
several Print Server Cards, use Ethernet Address to select correct Print Server Card.
* If error occurs during the assigning
of an IP address, an error message
will be displayed. Check the
Ethernet address and IP address
and try again.
TIP
TIP
Click on the first or last page to see other AR-NC5J (serv.man5) service manuals if exist.