Read Sharp AR-NC5J (serv.man5) User Guide / Operation Manual online
7-13
Print Server Card User Software
Print Server Card
Users Manual
Subnet Mask:
Set up subnet mask. The value must be configured in the format of four part series of numbers separated by
decimal points, such as “xxx.xxx.xxx.xxx”. The gateway must reside within the same subnetwork as Print
Server Card. If you set as 0.0.0.0, this section will be invalid.
Default Gateway:
Set up gateway IP address. The value must be configured in the format of four part series of numbers separated
by decimal points, such as “xxx.xxx.xxx.xxx”. Gateway must reside within the same subnetwork as PCI-NIC. If
you set as 0.0.0.0, this section will be invalid.
Use FTP/LPD Banner:
Set to print banner page when using FTP/LPR printing.
Factory Defaults:
This will set parameters to factory default.
Update:
The new changes will be reflected to Print Server Card.
Cancel:
Cancel changes.
Click on the first or last page to see other AR-NC5J (serv.man5) service manuals if exist.