Read Sharp AR-M550 (serv.man30) FAQ online
REV. 1.00
19
Parameter
Argument
Meaning
OFF
Do not rotate an image 180 degrees.
REVERSEIMAGE
ON
Rotate an image 180 degrees.
If this command is omitted, Dragon operates like “OFF” is specified to an
argument.
RIPONCE: Collate and Uncollate Setting
If multiple copies set at COPIES are specified, to specify Collate output or
Uncollate output, this command is used.
Uncollate output, this command is used.
PJL SET, DEFAULT Command Parameter
Parameter
Argument
Meaning
OFF Uncollate
is
executed.
RIPONCE
ON
Collate is executed.
This command is ON by default.
If 1 is specified at COPIES, whether Uncollate or Collate is specified, the
same output result is given,
same output result is given,
SCALEDOWN: Image Scale Down in ESC/P
“Image scale down” is to scale down or print the print image into the specified
paper in ESC/P emulation.
To set values of the image scale down item, a parameter “SCALEDOWN”
of PJL SET/DEFAULT command is defined.
of PJL SET/DEFAULT command is defined.
PJL SET/DEFAULT Command
Parameter
Argument
Meaning
OFF
Print image is not scaled down.
F15B4L
Print image is scaled down from F15
paper to B4 paper-Landscape.
paper to B4 paper-Landscape.
F15A4L
Print image is scaled down from F15
paper to A4 paper-Landscape.
paper to A4 paper-Landscape.
F10A4P
Print image is scaled down from F10
paper to A4 paper-Portrait.
paper to A4 paper-Portrait.
SCALEDOWN
B4A4L
Print image is scaled down from B4
paper to A4 paper-Landscape.
paper to A4 paper-Landscape.
Click on the first or last page to see other AR-M550 (serv.man30) service manuals if exist.