Read Sharp AR-M550 (serv.man30) FAQ online
REV. 1.00
14
If the specified number of pages is bigger than the number of insertion
pages for the Dragon product, the PJL commands are executed in order of
its appearance and the data that exceeds the insertion number of pages
are ignored.
INTERLEAVE: Interleave Setting
To tell whether interleave for print job is executed, “INTERLEAVE” is
defined. This command is used to set “Transparency Inserts.”
defined. This command is used to set “Transparency Inserts.”
PJL SET Command Parameter
Parameter
Argument
Meaning
OFF
It is not executed,
BLANK
Data is not printed to
transparency inserts.
transparency inserts.
INTERLEAVE
ON Data
is
printed
to
transparency inserts.
(Note) When you use this command, it is desirable to set the
“PAPERTYPE” command to the transparency inserts type.
“PAPERTYPE” command to the transparency inserts type.
INTERLEAVESRC: Interleave Tray Setting
To tell from which tray interleave paper for print job is fed,
“INTERLEAVESRC” is defined. This command is used to set
“Transparency Inserts.”
“INTERLEAVESRC” is defined. This command is used to set
“Transparency Inserts.”
PJL SET Command Parameter
Parameter
Argument
INTERLEAVESRC
See Table Param-F.
When this command is used with the INTERLEAVETYPE command, the
INTERLEAVESRC command is given priority.
INTERLEAVESRC command is given priority.
(Note) When you use this command, it is desirable to set “PAPERTYPE”
command to the transparency inserts type.
command to the transparency inserts type.
INTERLEAVETYPE: Interleave Type Setting
To tell what types of interleave paper for a print job, “INTERLEAVETYPE”
is defined. This command is used to set “Transparency Inserts.”
is defined. This command is used to set “Transparency Inserts.”
Click on the first or last page to see other AR-M550 (serv.man30) service manuals if exist.