AR-M550 (serv.man29). ARM550 620-Key Operators Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 13

This program is used to prohibit changes to the clock
adjust setting. When the program is enabled, "Clock" in
the custom settings cannot be used. To adjust the date
and time, this program must first be disabled (remove
the checkmark).

Use these programs when a peripheral device on the
machine has failed or when you wish to temporarily
disable a device. The programs can also be used to
change the function setting of a device as required by
your conditions of use.
"Device control" consists of the following programs:

● Original size detector setting
● Disabling of document feeder
● Disabling of duplex
● Disabling of large capacity cassette
● Disabling of stapler
● Disabling of punch
● Disabling of finisher
● Disabling of inserter
● Disabling of covers/inserts mode
● Saddle stitch position adjust
● Auto switching of finisher trays
● Rotated output
● Auto paper selection setting

This program is used to select the standard original
sizes that can be detected by the original size detection
function. Select one of the four groups indicated below.
The factory default setting is "AB-1 (INCH-1)". Original
size detection by the document glass can also be
disabled.

If "CANCEL DETECTION AT DOCUMENT GLASS" is
set, originals will be regarded as EXTRA for all copier
functions and no original size will be displayed.

This program is used to prevent use of the reversing
automatic document feeder when it malfunctions. In
this case, scanning can still be performed using the
document glass.

This program is used to disable duplex printing when
the duplex module malfunctions. If this program is set,
only one-sided printing can be performed.

Use this program when you wish to prohibit use of the
large capacity cassette or when it has failed.

This program is used to disable stapling when the
stapler unit of the finisher or the saddle stitch finisher
malfunctions.

Use this program when you wish to prohibit punching
or when the punch unit of the finisher or saddle stitch
finisher has failed.

Use this program when you wish to prohibit use of the
finisher or saddle stitch finisher, or when either has
failed.

Use this program when you wish to prohibit use of the
inserter or when it has failed.

Use this program when you wish to prohibit use of the
covers/inserts mode.

Group

Detectable original sizes

Document feeder tray (for reversing
automatic document feeding)

Document glass

1 INCH-1

11" x 17", 8-1/2" x 14",
8-1/2" x 11", 
8-1/2" x 11"R,
5-1/2" x 8-1/2"

A4

2 INCH-2

11" x 17", 8-1/2" x 13",
8-1/2" x 11", 
8-1/2" x 11"R,
5-1/2" x 8-1/2"

A4

3 AB-1

A3, A4, A4R, A5,
B4, B5, B5R

8-1/2" x 11",
216x330

4 AB-2

A3, A4, A4R, A5,
B5, B5R, 216x330

8-1/2" x 11", B4

dragon_keyop_suk.book  11 ページ  ２００４年１月２２日 木曜日 午後６時２１分