AR-M550 (serv.man29). ARM550 620-Key Operators Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 11

The machine keeps a log of the jobs it has run. The job
log can be used to check general use of the machine.
The job log can be written to your computer in CSV
format using a Web browser. This program is used to
clear the job log. There is normally no need to use the
program.

"Energy save" provides the following four programs to
reduce your power costs. From an environmental
perspective, this also helps conserve natural
resources and reduce pollution.

● Toner save in printer mode
● Auto power shut-off
● Auto power shut-off timer
● Preheat mode setting

Printing in the toner save mode will reduce  toner
consumption. If toner save is set, black solid areas will
be printed as halftone. (This setting is effective only for
printing without use of the dedicated printer driver. If
the printer driver is used, the printer driver setting will
override the setting of this program.)

If the machine is not used for a set duration of time,
auto power shut-off activates to enable maximum
conservation of energy.
This function allows you to reduce power costs, and at
the same time helps conserve natural resources and
reduce pollution.
This program is used to enable or disable auto power
shut-off. To disable the function, remove the
checkmark from the checkbox. Use this program if you
prefer that auto power shut-off does not operate.

This program is used to set the time after which auto
power shut-off activates.
The time can be set to as long as 240 minutes in
increments of one minute.

If the printer is not used for the length of time set with
this program after printing is finished, it will enter
preheat mode. This function reduces your power costs,
and at the same time helps conserve natural resources
and reduce pollution. 
Select the most suitable setting to match your pattern
of use of the printer.
The time can be set to as long as 240 minutes in
increments of one minute. (Preheat mode cannot be
disabled.)

Print data

Example of 
print in the 
toner save 
mode

If you prefer that auto power shut-off activates as
little as possible, it is recommended that you try
lengthening the time setting after which activation
takes place rather than disabling the function
altogether. (The time setting is changed using the
following "AUTO POWER SHUT-OFF TIMER"
program.)

NOTE
● We suggest you set the most appropriate time

according to your usage pattern.

● If you use the program "Auto power shut-off" to

disable the auto power shut-off mode, the time set
with this program will be ignored.

dragon_keyop_suk.book  9 ページ  ２００４年１月２２日 木曜日 午後６時２１分