Read Sharp AR-M300 (serv.man11) User Guide / Operation Manual online
6-11
6
KEY OPERATOR PROGRAMS
■ Key operator code change
This program is used to change the key operator
code.
The key operator must register a key operator code
number and use the number to gain access to key
operator programs. Only one key operator code
number can be registered. The factory has registered
the code number mentioned on page 7-11 to allow
initial access to the programs. It is recommended
that the key operator use the factory number for initial
entry into the programs and then choose and enter
another number by this program.
code.
The key operator must register a key operator code
number and use the number to gain access to key
operator programs. Only one key operator code
number can be registered. The factory has registered
the code number mentioned on page 7-11 to allow
initial access to the programs. It is recommended
that the key operator use the factory number for initial
entry into the programs and then choose and enter
another number by this program.
{Key operator code change}
Same as for the main unit.
■ Default settings
These programs are used to adjust the settings of
various printer functions from the factory default
settings or to cancel the settings.
various printer functions from the factory default
settings or to cancel the settings.
Print density level
This program is used to adjust the lightness or
darkness of prints. The print density level can be
selected from the following.
LIGHTEST, LIGHTER, NORMAL, DARKER,
DARKEST
darkness of prints. The print density level can be
selected from the following.
LIGHTEST, LIGHTER, NORMAL, DARKER,
DARKEST
{Print density level}
Five levels are provided for density adjustment.
These are represented by numbers displayed on
the touch panel. Among the displayed numbers, a
smaller value indicates lighter density and a larger
value indicates a darker density.
These are represented by numbers displayed on
the touch panel. Among the displayed numbers, a
smaller value indicates lighter density and a larger
value indicates a darker density.
Disable notice page printing
This program is used to disable notice page printing.
For a description of notice page printing, see “Notice
page printing” (page 7-5).
For a description of notice page printing, see “Notice
page printing” (page 7-5).
{Prohibit notice page printing}
Same as for the main unit.
Disable test page printing
This program is used to disable test page printing.
If this program is set, printer test page printing in
custom settings (page 3-6) cannot be executed.
If this program is set, printer test page printing in
custom settings (page 3-6) cannot be executed.
{Prohibit test page printing}
Same as for the main unit.
A4/LT auto select
If this program is set, and printing onto 8-1/2" x 11"
size paper is selected but not available, the printer
will automatically substitute A4 size paper in place
of 8-1/2" x 11" paper if A4 paper is available.
size paper is selected but not available, the printer
will automatically substitute A4 size paper in place
of 8-1/2" x 11" paper if A4 paper is available.
●
8-1/2" x 11" paper cannot be automatically
selected in place of A4.
selected in place of A4.
{A4/letter size auto change}
Same as for the main unit.
NOTE
When 8-1/2" x 11" size is specified for a document
attached to an E-mail that has been transmitted from
a foreign country and A4 size paper is not installed in
the printer, printing cannot be done without operator
intervention. If this program is set, printing will be
executed without intervention if a paper tray is loaded
with A4 paper.
attached to an E-mail that has been transmitted from
a foreign country and A4 size paper is not installed in
the printer, printing cannot be done without operator
intervention. If this program is set, printing will be
executed without intervention if a paper tray is loaded
with A4 paper.
Click on the first or last page to see other AR-M300 (serv.man11) service manuals if exist.