Read Sharp AR-M300 (serv.man10) User Guide / Operation Manual online
28
INTERRUPTING A PRINT OR COPY RUN
INTERRUPT can be used to temporarily stop a long print or copy job so that another copy job can be run. Only copy
jobs can be run during interrupt.
jobs can be run during interrupt.
1
Place the original in the document feeder tray
or on the document glass. (page 7)
or on the document glass. (page 7)
2
Touch the [INTERRUPT] key.
ORIGINAL
A4
AUTO
0
AUTO
100
%
A4
INTERRUPT
EXPOSURE
PAPER SELECT
When it is possible to interrupt
a print or copy job in progress,
the [INTERRUPT] key will
appear as shown in the
illustration.
a print or copy job in progress,
the [INTERRUPT] key will
appear as shown in the
illustration.
CANCEL
0
AUTO
TO
100
%
A4
EXPOSURE
PER SELECT
ORIGINAL
A4
When the [INTERRUPT]
key is touched in step 2, the
[INTERRUPT] touch key will
be replaced by the
[CANCEL] key as shown in
the illustration. To cancel
interrupt copying at any
time, touch the [CANCEL]
key.
key is touched in step 2, the
[INTERRUPT] touch key will
be replaced by the
[CANCEL] key as shown in
the illustration. To cancel
interrupt copying at any
time, touch the [CANCEL]
key.
3
Make all other desired settings such as
exposure, paper size and number of copies and
then press the [START] key.
exposure, paper size and number of copies and
then press the [START] key.
When using the document
glass, replace the original
with the next original and
press the [START] key.
Repeat this operation until
all originals have been
scanned. Then, touch the
[READ-END] key.
glass, replace the original
with the next original and
press the [START] key.
Repeat this operation until
all originals have been
scanned. Then, touch the
[READ-END] key.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED
WHEN FINISHED
, PRESS [READ-END].
READ-END
■ When step 3 is completed, a copy job icon will appear
at the top of the job icon queue at the left side of the
screen and interrupt copying will start. After the
interrupt job is completed, the interrupted job will
automatically resume.
screen and interrupt copying will start. After the
interrupt job is completed, the interrupted job will
automatically resume.
Click on the first or last page to see other AR-M300 (serv.man10) service manuals if exist.