Read Sharp AR-M300 (serv.man10) User Guide / Operation Manual online
25
Multi shot
The multi shot function is used to copy up to four originals, collectively in a specified order, per sheet of copy paper in
any one of four layout patterns.
any one of four layout patterns.
[Example] Copying seven originals using the 4 in 1 MULTI SHOT selection in a layout pattern starting from the upper
left to lower right.
left to lower right.
●
When using the multi shot function, place the originals,
select the desired paper size, and select the copying
mode (page 9) before selecting the multi shot function
on the special modes screen.
select the desired paper size, and select the copying
mode (page 9) before selecting the multi shot function
on the special modes screen.
●
When using the multi shot function, the appropriate
copy ratio will be automatically set based on the
original size, paper size, and the number of originals
to be copied onto one sheet. The minimum reduction
ratio is 25%. Depending on the original size, paper
size, and the number of originals to be copied onto
one sheet, the appropriate copy ratio may be smaller
than 25%. In this case, portions of original images
may not be copied.
copy ratio will be automatically set based on the
original size, paper size, and the number of originals
to be copied onto one sheet. The minimum reduction
ratio is 25%. Depending on the original size, paper
size, and the number of originals to be copied onto
one sheet, the appropriate copy ratio may be smaller
than 25%. In this case, portions of original images
may not be copied.
1
Touch the [MULTI SHOT] key on the SPECIAL
MODES screen.
MODES screen.
MULTI SHOT
The multi shot setting
screen will appear.
screen will appear.
2
Select the number of originals to be copied onto
one sheet of copy paper on the multi shot
selection screen.
one sheet of copy paper on the multi shot
selection screen.
2in1
4in1
The orientation of copy
paper and the image of the
originals may be rotated as
needed.
paper and the image of the
originals may be rotated as
needed.
3
Select the layout.
LAYOUT
Select the order in which the
originals will be arranged on
the copy.
originals will be arranged on
the copy.
Copies
One-sided copies from
one-sided originals
one-sided originals
One-sided copies from
two-sided originals
two-sided originals
4
[When using the automatic document feeder:]
Copying will start after all originals have been scanned.
(The next step is not needed.)
(The next step is not needed.)
[When using the document glass:]
Replace the original with the next original and press the
[START] key. Repeat this operation until all originals have
been scanned.
[START] key. Repeat this operation until all originals have
been scanned.
5
If scanning is being done from the document
glass, touch the [READ-END] key after the last
original has been scanned to start copying.
glass, touch the [READ-END] key after the last
original has been scanned to start copying.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED
WHEN FINISHED
, PRESS [READ-END].
READ-END
To cancel the multi shot function, touch the [CANCEL] key
on the multi shot setting screen.
on the multi shot setting screen.
SPECIAL FUNCTIONS
Click on the first or last page to see other AR-M300 (serv.man10) service manuals if exist.