Read Sharp AR-M300 (serv.man10) User Guide / Operation Manual online
23
Pamphlet copy
The pamphlet copy function is used to arrange copies in proper order for eventual center-stapling and folding into a
booklet. Two original pages are copied onto each side of copy paper. Four pages are, therefore, copied onto one sheet.
booklet. Two original pages are copied onto each side of copy paper. Four pages are, therefore, copied onto one sheet.
[Example] Copying eight originals in the pamphlet copy mode
1
Touch the [PAMPHLET COPY] key on the
SPECIAL MODES screen.
SPECIAL MODES screen.
PAMPHLET COPY
The pamphlet copy setting
screen will appear.
screen will appear.
2
Designate the type of originals to be copied: 1-
sided or 2-sided.
sided or 2-sided.
ORIGINAL
1-SIDED
2-SIDED
The [2-SIDED] key appears
when a B/W scanner
module/DSPF (AR-EF1) is
installed. Touch this key to
perfor m automatic two-
sided scanning of an
original.
when a B/W scanner
module/DSPF (AR-EF1) is
installed. Touch this key to
perfor m automatic two-
sided scanning of an
original.
3
Select the binding position (left binding or right
binding) and touch the [OK] key.
binding) and touch the [OK] key.
RIGHT
BINDING
CANCEL
LEFT
BINDING
OK
4
Touch the [OK] key on the special modes
screen.
screen.
5
Copy from the first page to the last page from
either the document feeder or the document
glass.
either the document feeder or the document
glass.
1
2
3
4
5
6
7
8
7
8
5
6
3
4
1
2
First page
First page
Originals (one-sided)
Originals (two-sided)
Left binding
For left to
right turning
For left to
right turning
Right binding
For right to
left turning
For right to
left turning
Finished copies are
folded in two.
folded in two.
6
Ensure that the desired paper size has been
automatically selected based on the original
size.
automatically selected based on the original
size.
COPY RATIO
PAPER SELECT
AUTO
100
%
A3
To select another size paper,
select the desired size and
touch the [AUTO IMAGE] key.
The appropriate copy ratio will
be selected automatically
based on the original size and
the paper size. (See steps 2
and 3 on page 16.)
select the desired size and
touch the [AUTO IMAGE] key.
The appropriate copy ratio will
be selected automatically
based on the original size and
the paper size. (See steps 2
and 3 on page 16.)
7
Make all other desired settings such as
exposure or the number of copies, and press
the [START] key.
exposure or the number of copies, and press
the [START] key.
8
[When using the automatic document feeder:]
Copying will start after all originals have been scanned.
(The next step is not needed.)
(The next step is not needed.)
[When using the document glass:]
Replace the original with the next original and press the
[START] key. Repeat this operation until all originals have
been scanned.
[START] key. Repeat this operation until all originals have
been scanned.
9
Touch the [READ-END] key. (only if the
document glass is used)
document glass is used)
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED
WHEN FINISHED
, PRESS [READ-END].
READ-END
When the pamphlet copy function is set, the two-
sided copying mode will be automatically
selected and cannot be changed.
sided copying mode will be automatically
selected and cannot be changed.
To cancel the pamphlet copy function, touch the [CANCEL]
key on the pamphlet copy setting screen.
key on the pamphlet copy setting screen.
SPECIAL FUNCTIONS
●
Scan the originals from the first page to the last page.
The order of copying will be automatically adjusted
by the machine.
The order of copying will be automatically adjusted
by the machine.
●
Either left binding (right to left turning) or right binding
(left to right turning) can be selected.
(left to right turning) can be selected.
●
Four originals will be copied onto one sheet. Blank
pages may be automatically produced at the end
depending on the number of the originals.
pages may be automatically produced at the end
depending on the number of the originals.
●
When using this function, a duplex module must be
installed.
●
If a saddle stitch finisher is installed, copies can be
stapled in two positions along the center of copies
and folded at the center.
stapled in two positions along the center of copies
and folded at the center.
Click on the first or last page to see other AR-M300 (serv.man10) service manuals if exist.