AR-M165-207 (serv.man24). Operation Manual (for Printing and Scanning)when ARNB3 (Network Printing and Scanning Option) is not installed. - Sharp Copying Equipment User Guide / Operation Manual. Page 27

The key operator programs allow the administrator of the machine (key operator) to enable and disable functions to 
suit the needs of the workplace. This chapter explains key operator programs for the printer and scanner functions. 
For key operator programs that are common to all modes, see the "Key operator's guide".

The key operator programs for the printer and scanner functions are shown in the following table. Factory default 
settings are indicated in bold. When "ENABLE, DISABLE" appears in the "Settings" column of a program, the 
program is enabled by pressing the [OK] key so that a checkmark appears in the checkbox. A checkmark in the 
checkbox (

) indicates that "ENABLE" is selected. No checkmark (

) indicates that "DISABLE" is selected.

For the initial key operator code set at the factory, see "PROGRAMMING A KEY OPERATOR CODE" in the "Key 
operator's guide".

Printer

NOTICE PAGE

ENABLE, DISABLE

Select whether or not a Notice Page 

 is printed when printing is not successful 

due to a memory full (or other) error.

FORCED OUTPUT OF 
PRINT

ENABLE, DISABLE

When no tray has the specified size of paper, 
this setting is used to select whether or not 
the print job will be printed on the closest size 
of paper.

Scanner

DISABLE USB SCAN

YES, NO

Select whether or not scanning from a 
computer and scanning from the machine are 
disabled when a USB connection is used. 
When "YES" is selected, USB scanning is 
disabled.