AR-M165-207 (serv.man24). Operation Manual (for Printing and Scanning)when ARNB3 (Network Printing and Scanning Option) is not installed. - Sharp Copying Equipment User Guide / Operation Manual. Page 24

The procedure for scanning using the [SCAN] key is explained in the following. When scanning is performed by this method, 
the previously specified application will automatically start and the scanned image will be acquired into the application. 

For information on how to place the original, see 
"4. COPY FUNCTIONS" in the "Operation 
manual (for general information and copier)".

The [SCAN] key indicator lights up to indicate that the 
machine is in scanner mode and the destination 
selection screen appears in the display. A name can 
be entered in Button Manager for each of the 
destinations "SC1:" to "SC6:", which will appear in the 
format "SC1:XXXXX".

The following applications have been set at the factory 
for each of the scan destinations 1 to 6. 
If you wish to change a setting, see 

. 

The selected destination 
appears.

Scanning begins.

• Scanner mode cannot be used in the following situations:

• A problem has occurred in the machine such as a paper misfeed or an open cover.
• The key operator programs are being used.
• The tray paper size is being set.
• During copying or printing
• During scanning of an original for a fax transmission (when the fax option is installed)

• If the machine is in copy mode, press the [SCAN] key to switch to scanner mode and clear the previously set 

copy settings.

If computers are connected to both of the 
USB ports on the machine, the following 
screen will appear in the display. In this 
case, use the [

] or [

] key to select the 

USB port that you wish to use and press the 
[OK] key. For the location of the ports, see 
"1. BEFORE USING THE PRODUCT" in the 
"Operation manual (for general information 
and copier)".

COPY

ON LINE DATA

LINE

DATA

SCAN

PRINT

EXP

 DESTINATION SELECT
  

SC1:

  SC2:
  SC3:
  SC4:

 INTERFACE SELECT
  

USB-1

  USB-2
  
  

GH

PQR

DUPLEX

SPECIAL FUNCTION

DUPLEX SCAN

SC1:

Sharpdesk

SC2:

Email

SC3:

FAX

SC4:

OCR

SC5:

Microsoft Word

SC6:

Filing

• The [COPY] key, [PRINT] key, or [FAX] 

key can be pressed in scanner mode to 
switch to the corresponding mode.

• For restrictions on using copy, printer, or 

fax mode while in scanner mode, or using 
scanner mode while in copy, printer, or fax 
mode, see "OPERATION IN COPY, 
PRINT, SCAN, AND FAX MODES" in "1. 
BEFORE USING THE PRODUCT" in the 
"Operation manual (for general 
information and copier)".

GHI

OK

BACK

Ready to scan.

SC2:

WXYZ

@.-_

READ-END