AR-LC5 (serv.man3). AR-LC5 Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 2

AR-LC5  OUTLINE OF THE PRODUCT  1 - 1

This product, a modification model of the AR-LC2N, is a paper feed
unit of 3,000 sheets which is externally installed to the master
machine. The lower rail and the paper feed timing are adjusted.

Since about 3,000 sheets of A4 paper can be loaded on this model,
handling of paper supply is greatly saved.

• Start installation after checking that the DATA indicator on the oper-

ation panel is neither lit nor blinking.

• For installation of AR-LC5, an optional stand (AR-D17/AR-D18/AR-

D19) must have been installed.

• Ensure that the connecting plate located on the front side of the

optional stand and the connecting plates on the sides (one on the
right side and left side respectively) are securely attached.

1) Turn off the main switch of the main unit.

<1> Turn the main switch located on the left side of the main unit

to the "OFF" position.

<2> Then remove the power plug of the main unit from the outlet.

Paper feed capacity

3,000 sheets (80g/m

2

), effective height 

320mm

Paper remaining quantity 
detection

YES

Detection width
Paper size detection

NO

Paper size

A4 (8.5" x 11") 

Paper weight

60 to 105g/m

2

Switching support

NO

Size detection

NO

Dehumidifying heater

NO

Factory setting paper size

A4

Power supply

5V and 24V are supplied from the desk.

Max. power consumption

+24V: 1A/24W
+5V: 0.2A/1.0W

External dimensions

W330 x D595 x H40.6 (mm)

Weight

32.5kg (excluding paper)

Mounting plate:

1 pc.

Upper mounting

plate: 2 pcs.

Securing plate: 

1 pc.

Connecting

plate: 1 pc

Screw A

(4 x 12, hexagonal 

washer based): 2 pcs.

Screw B

(4 x 18, hexagonal

 washer based): 4 pcs.

Screw C:

1 pc.

Screw D:

 2 pcs.

OFF