Read Sharp AR-FX8 Service Manual online
AR-FX8 SIMULATIONS, FAX SOFTWARE SWITCH 6 - 38
US = U.S.A./Canada,
UK = U.K.,
FR = France,
GR = Germany,
SW = Sweden,
AS = Australia,
NZ = New Zealand
49 1-8 Dial number in tone
pulse auto setting
Used to set dial number (2 digits) in auto setting of
telephone kind (DP/DTMF).
Setting is made by BCD input.
The set range is 0 ~ B. When set to outside the set
range, the default value of 5 is applied to.
telephone kind (DP/DTMF).
Setting is made by BCD input.
The set range is 0 ~ B. When set to outside the set
range, the default value of 5 is applied to.
0
0
0
0
0
0
0 55
1
1
1
1
1
1
1
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
1
1
1
1
1
1
1
50 1-6 Not used
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
7
Setup of send/receive
complete sound
(buzzer length)
complete sound
(buzzer length)
Used to set the buzzer length from the speaker made
after completion of FAX transmission and reception.
Excluding when a communication error occurs.
after completion of FAX transmission and reception.
Excluding when a communication error occurs.
0
0
0
0
0
0
0 1sec
8
Not used
0
0
0
0
0
0
0
51
1
Voice answering send
level to the line
level to the line
Used to set the voice answering volume to the line. Set
to Large or Small with the hardware.
to Large or Small with the hardware.
0
0
0
0
0
0
0 Large
2-7 Not used
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
8
Line monitor range
Used to set the line monitor range when the line monitor
function is used.
When set to "Until NSF signal send/receive," monitoring
is made until DCS or NSF signal is received. When set to
"All," all are monitored until the line is disconnected.
function is used.
When set to "Until NSF signal send/receive," monitoring
is made until DCS or NSF signal is received. When set to
"All," all are monitored until the line is disconnected.
0
0
0
0
0
0
0 Until NSF
signal send/
receive
receive
52 1,2 Ringing sound volume
Used to set the ringing sound volume in reception
regardless of handset installation.
The sound volume is available in the following four
levels.
regardless of handset installation.
The sound volume is available in the following four
levels.
1
1
1
1
1
1
1 Medium
Initial setup
0
0
0
0
0
0
0
3,4 Line monitor sound
volume setup
Used to set the speaker volume in line monitoring.
The volume is available in the following 4 levels.
The volume is available in the following 4 levels.
1
0
0
0
1
1
1 Medium
(US, SW,
AS, NZ)
Sound NO
(UK, FR,
GR)
AS, NZ)
Sound NO
(UK, FR,
GR)
Initial setup
0
0
0
0
0
0
0
SW
No.
No.
Bit
No.
Item
Switch selection and function
US UK FR GR SW AS NZ Initial value
Key
operator
1: 3sec
0: 1sec
1: Small
0: Large
1: All
0: Until sending/receiving NSF signal
Bit No.
1
2
Sound NO
0
0
Small
0
1
Medium
1
0
Large
1
1
Bit No.
3
4
Sound NO
0
0
Small
0
1
Medium
1
0
Large
1
1
Click on the first or last page to see other AR-FX8 service manuals if exist.