Read Sharp AR-FX8 Service Manual online
AR-FX8 SIMULATIONS, FAX SOFTWARE SWITCH 6 - 35
US = U.S.A./Canada,
UK = U.K.,
FR = France,
GR = Germany,
SW = Sweden,
AS = Australia,
NZ = New Zealand
40
3
Sent document print in F
code communication
code communication
Used to set whether part of the sent document is printed
or not on the communication report table in F code
communication. The setup of SW41-1 and SW41-2 has
priority over this setup.
or not on the communication report table in F code
communication. The setup of SW41-1 and SW41-2 has
priority over this setup.
0
0
0
0
0
0
0 Not printed.
4
Report output
(When canceling)
(When canceling)
Used to set whether the communication report table is
outputted or not when transmission is canceled during
transmission of document.
outputted or not when transmission is canceled during
transmission of document.
0
0
0
0
0
0
0 Not output
5
Report output
(in confidential
reception) <FAX only>
(in confidential
reception) <FAX only>
Used to set whether the communication report table
(reception) is outputted or not in confidential reception.
(reception) is outputted or not in confidential reception.
0
0
0
0
0
0
0 Output
Initial setup
6-8 Not used
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
41 1,2 Send mode document
content print
(Report table)
<FAX only>
(Report table)
<FAX only>
Used to set whether part of a send document is printed
on the communication report (send) or not in FAX send
error. However, use the other soft switch to set whether
the communication report is printed or not.
on the communication report (send) or not in FAX send
error. However, use the other soft switch to set whether
the communication report is printed or not.
1
1
1
1
1
1
1 In case of
an error
Initial setup
0
0
0
0
0
0
0
3,4 Report output
(transmission)
<FAX only>
<FAX only>
Used to set the communication report table output after
transmission (except for sequential broadcast,
sequential polling, relay broadcast).
transmission (except for sequential broadcast,
sequential polling, relay broadcast).
1
1
1
1
1
1
1 Only when
transmission
is failed
is failed
Initial setup
0
0
0
0
0
0
0
5,6 Report output
(sequential broadcast,
sequential polling, relay
broadcast)
sequential polling, relay
broadcast)
Used to set the communication report table output after
transmission (sequential broadcast, sequential polling,
relay broadcast).
transmission (sequential broadcast, sequential polling,
relay broadcast).
0
0
0
0
0
0
0 All print
Initial setup
1
1
1
1
1
1
1
7,8 Report output
(reception)
<FAX only>
<FAX only>
Used to set the communication report table output in
reception (except for confidential reception).
reception (except for confidential reception).
0
0
0
0
0
0
0 Print
inhibited
Initial setup
0
0
0
0
0
0
0
42 1-3 Not used
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
4
F.A.S.T function
Used to set the management function performed in FAX
communication through the telephone line.
Valid only in North America.
communication through the telephone line.
Valid only in North America.
0
0
0
0
0
0
0 NO
SW
No.
No.
Bit
No.
Item
Switch selection and function
US UK FR GR SW AS NZ Initial value
Key
operator
1: Sent document is
printed.
0: Sent document is not
printed.
1: Communication report
table is printed.
0: Communication report
table is not printed.
1: Communication report
table is not printed.
0: Communication report
table is printed.
Bit No.
1
2
Not print
0
0
Always print
0
1
In case of an error
1
0
In case of an error
1
1
Bit No.
3
4
Print inhibited
0
0
All print
0
1
Only when transmission is failed
1
0
Only when transmission is failed
1
1
Bit No.
5
6
Print inhibited
0
0
All print
0
1
Only address to which transmission is failed
1
0
All print
1
1
Bit No.
7
8
Print inhibited
0
0
All print
0
1
Only in case of an error
1
0
Print inhibited
1
1
1: YES
0: NO
Click on the first or last page to see other AR-FX8 service manuals if exist.