Read Sharp AR-FX7 (serv.man3) User Guide / Operation Manual online
18
BASIC OPERATIONS
FAXING A LARGE NUMBER OF PAGES
When you have a large number of pages to fax, scan the pages in batches using the RSPF. A maximum of 100
pages can be placed in the RSPF at once; however, placing pages in batches allows you to scan in more than 100
pages and send them in a single transmission. Note that the number of pages that can be scanned may vary
depending on the content of the pages and how much memory is being used.
pages can be placed in the RSPF at once; however, placing pages in batches allows you to scan in more than 100
pages and send them in a single transmission. Note that the number of pages that can be scanned may vary
depending on the content of the pages and how much memory is being used.
1
Make sure that the machine is in fax
mode
mode
When the [FAX] key light
is on, the machine is in
fax mode. If the light is
not on, press the [FAX]
key.
is on, the machine is in
fax mode. If the light is
not on, press the [FAX]
key.
2
Place the original. (p.10)
Place the first pages that
you wish to scan.
you wish to scan.
3
Touch the [ORIGINAL] key.
If the address directory
screen appears, touch
the [CONDITION
SETTINGS] key to
display the condition
settings screen (p.7).
After touching the
[ORIGINAL] key, check
screen appears, touch
the [CONDITION
SETTINGS] key to
display the condition
settings screen (p.7).
After touching the
[ORIGINAL] key, check
the original size displayed in the key. If the original size
was not correctly detected, set the correct original
size. ("MANUALLY SETTING THE SCANNING SIZE"
(p.20))
was not correctly detected, set the correct original
size. ("MANUALLY SETTING THE SCANNING SIZE"
(p.20))
4
Touch the [JOB BUILD] key.
5
Touch the [OK] key.
You will return to the
initial screen.
initial screen.
The many originals icon appears next to the
[ORIGINAL] key.
[ORIGINAL] key.
6
Perform steps 4 to 6 of "BASIC
PROCEDURE FOR SENDING FAXES"
(p.12).
PROCEDURE FOR SENDING FAXES"
(p.12).
7
Press the [START] key (
).
Scanning of the originals
begins. When scanning
is finished, the
[READ-END] key
appears in the touch
panel.
begins. When scanning
is finished, the
[READ-END] key
appears in the touch
panel.
SCAN
FAX
DATA
DATA
LINE
JOB STATUS
CUSTOM SE
AUTO A4R
ORIGINAL
STANDARD
RESOLUTION
MANUAL
OTATE THE IMAGE 90 DEGREES
OK
2-SIDED
TABLET
TABLET
SIZE
JOB
BUILD
BUILD
MANUAL
OTATE THE IMAGE 90 DEGREES
OK
2-SIDED
TABLET
TABLET
SIZE
JOB
BUILD
BUILD
AUTO A4R
ORIGINAL
STANDARD
RESOLUTION
EXPOSURE
Click on the first or last page to see other AR-FX7 (serv.man3) service manuals if exist.