AR-FX7 (serv.man3). Operation Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 11

*Long originals
Depending on the resolution setting and the width of the original, there may not be sufficient space in memory to hold a 
long original. In this case, refer to the following table and select a lower resolution setting and/or shorten the original.

Note that the edges of an original cannot be scanned.

Area that cannot be scanned : 5 mm (0.2") or less at top edge 

and 5 mm (0.2") or less at bottom edge

: Near edge + far edge = 6 mm (0.24") or 

less

If the width of the faxed document is greater than the receiving machine's maximum receivable width, the document 
will be automatically reduced.

A document can also be faxed without reducing its size. In this case, the left and right edges will not be transmitted. 
("AUTO RECEIVE REDUCE SETTING" (p.102))

Using the RSPF

210 mm (width) x 148 mm (length)
(8-1/2" (width) x 5-1/2" (length))
148 mm (width) x 210 mm (length)
(5-1/2" (width) x 8-1/2" (length))

297 mm (width) x 1000 mm (length)
(11" (width) x 39.3"* (length))
* Long originals can be loaded.

Using the document glass

297 mm (width) x 420 mm (length)
(11" (width) x 17"  (length))

• Originals that are not a standard size (p.20) can also be faxed.
• There are restrictions on originals that can be scanned using the RSPF. See 

"

POINTS TO NOTE WHEN 

MAKING COPIES

" in 

the operation manual for copier.

Standard

1000 mm (39.3")

1000 mm (39.3")

1000 mm (39.3")

Fine

1000 mm (39.3")

1000 mm (39.3")

1000 mm (39.3")

Super fine

1000 mm (39.3")

1000 mm (39.3")

1000 mm (39.3")

Ultra fine

880 mm (34.6")

1000 mm (39.3")

1000 mm (39.3")

A3 (11" x 17")

B4 (8-1/2" x 14")

B4 (8-1/2" x 14")

1 : 0.70 (Area ratio)

A3 (11" x 17")

A4 (8-1/2" x 11")

A4R (8-1/2" x 11"R)

1 : 0.5 (Area ratio)

B4 (8-1/2" x 14")

A4 (8-1/2" x 11")

A4R (8-1/2" x 11"R)

1 : 0.64 (Area ratio)

Top edge

Near edge

Bottom edge

Far edge