Read Sharp AR-FX2 (serv.man2) Service Manual online
[3] INSTALLING PROCEDURE
1. FAX expansion kit, LCD panel kit instal-
lation
● When installing the FAX expansion kit, the LCD panel kit is required.
Note: Before performing this procedure, be sure to disconnect the
power plug from power outlet. If not, an electric shock may be
resulted.
resulted.
1) Remove the front cover of the copier machine.
● Open the bypass tray and the side cover. Remove the paper tray.
● Open the bypass tray and the side cover. Remove the paper tray.
Warp the front cover inside by pressing the both sides, and remove
the front cover from the hinge arm of the machine.
the front cover from the hinge arm of the machine.
2) Remove the operation panel.
● Remove the operation panel fixing screw, and remove the flat cable.
● Remove the operation panel fixing screw, and remove the flat cable.
3) Remove the ground wire. (Note: Depending on model or version,
select the appropriate diagram (A or B) for ground wire removal.)
(A) Remove the screw, and remove the ground wire. Then install the
screw on the left side.
(B) Remove the screw, and remove the ground wire.
4) Remove the cover.
● Remove the screw, and attach the LCD dummy cover and the FAX
● Remove the screw, and attach the LCD dummy cover and the FAX
dummy cover.
5) Install the LCD unit.
● Attach the LCD unit from your side, engage the pawls with the at-
● Attach the LCD unit from your side, engage the pawls with the at-
tachment holes, and fix with screws. Then connect the flat connec-
tor.
tor.
Parts included in the FAX expansion kit
(14) FCC Registration Label
(1) FAX key unit
(2) FAX PWB
(3) TEL/LIU PWB
(4) Speaker unit
(5) FFC harness
(6) FAX harness
(7) Line harness
(9) M3 screws (gold color) (10) M3 screws (gold color) (11) Harness securing tape
(12) Supplied label
(13) Label for note
(15) FAX connector cover (16) Operation manual
(17) Installation manual
(8)
Line adapter
Packed items of the LCD panel kit
LCD unit
Motherboard
M3 screws(gold color)
Installation fixture
Ground plate
M3 screws(silver color)
(1)
(2)
M3X8
(1)
(2)
(3)
Blue line-must be up
AR-FX2
3 – 1
Click on the first or last page to see other AR-FX2 (serv.man2) service manuals if exist.