AR-FX2 (serv.man2). AR-FX2-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 51

The firmware of the flash memory on the FAX control PWB must be
revised in the following cases:
1) When a bug or an error is found.
2) When data in the flash memory is destroyed or deleted.

The maintenance FAX Program is a utility software which is used to
write into the download card used in version up of the AR-
160/200series FAX program. The operating procedure is as follows:

Personal computer: Windows95 (Japanese or English) machine with

PCMCIA card slot

Download software: Maintenance Fax Program
Download card: UKOG-0008QSZZ (BN-S04MF4C)
Card adapter: UKOG-0009QSZZ (BN-SPCADP)
Necessary file: CardAPI (Made by Adtek System Science) must be in-

stalled. Program data

∗ The maintenance FAX program may not operate normally when a

personal computer to which one of some kinds of anti-virus software
is installed is used.

(1) CardAPI installing procedure

1) Select “Setup.inf” in the CardAPI disk and right-click the mouse

to open the menu. 

2) Select “Install” in the menu. The file is automatically copied. 
3) Resume the system.

(2) Maintenance FAX Program installing procedure

1) Double-click “Setup.exe” in the setup disk 1 to start setup.
2) When setup is executed according to the setup withered direc-

tions, the icon is made in the start menu. 

3) Double-click the icon to start the program. 

(1) CardAPI uninstalling procedure

Uninstall is executed in “Add/Remove Programs” in the control
panel.
Follow the instructions of the uninstall withered to execute
uninstall. 

(2) Maintenance FAX Program uninstalling procedure

Uninstall is executed in “Add/Remove Programs” in the control
panel.
Follow the instructions of the uninstall withered to execute
uninstall. 

(1) Starting the program

Double-click MFP.exe in the installed folder, or execute the pro-
gram from the start menu. 

∗ This program cannot be multi-started. When it is tried to be multi-

started, an error message will be shown. 

(2) Descriptions of the main menu

When MFP.exe is executed, the following main menu is displayed.

The main menu shows the following information. 

<Slot status>
Slot 

⋅⋅⋅ The selected card slot number is displayed. The card status is

also displayed with colors. 

Green

The card is inserted into the slot and is
available for use. 

Yellow

The card is in standby or the battery is
exhausted. 

System color
(or gray)

The card is not inserted into the slot or the slot
cannot be used.

<Card device status>
Device 

⋅⋅⋅ Availability of the card device type is displayed with colors.

Green

The card device type is
recognized as
Intel28F008_5V.

Access to the card is
allowed.

Yellow

The card device type
cannot be recognized.
When the card size is
not 4Mbyte and
Card(C)_SetDevice(V)_Inte
l28F008_5V is checked.

Access to the card is
allowed, but if the actual
card device differs, an
unexpected error may
occur.

System
color
(or gray)

The card device type is
not set.

Access to the card is
inhibited.

∗ The slot status is green and the card device status if green or yellow,

access to the card is allowed.
If access to the card is inhibited, the functions cannot be used ex-
cept for selection of the slot and ending the application. 

<Card format type>
The operation type of the application is displayed.
If the inserted card has information on the card type, setup is automat-
ically made.
If the inserted card has no information on the card type, specify the
card type by checking either item of Card(C) _ SetCardType(T) on the
menu.

DownLoad Card

The operation type of the application is set
up in the DownLoad card.

Registration
Card

The operation type of the application is set
up in the Registration card.

Unknown Card

The operation type is not specified.

AR-FX2

9  –  1