Read Sharp AR-FN1 (serv.man3) Service Manual online
•
If the connecting hole is displaced toward the front side:
Turn knob A counterclockwise so that the connecting hole matches
the guide pin.
Then, push the finisher into the copier.
If the clearance between the finisher and copier is not proper,
adjust the clearances at the upper part and lower part using proce-
dure <1>.
the guide pin.
Then, push the finisher into the copier.
If the clearance between the finisher and copier is not proper,
adjust the clearances at the upper part and lower part using proce-
dure <1>.
7. Attach the exit tray and tray 3.
Insert the three pawls at the rear side of tray 3 into the holes of the
tray mounting platform and secure the tray using two screws.
Attach the two exit trays to the finisher from the boss at <1>.
tray mounting platform and secure the tray using two screws.
Attach the two exit trays to the finisher from the boss at <1>.
8. Attach the staple cartridge to the staple unit.
Turn the staple unit to face the front.
Insert the staple cartridge into the staple unit until it clicks in
place.
place.
Return the staple unit to face down.
9. Paste the stapling position labels.
For document cover:
Stapling position label A
For SPF:
Stapling position label A
(Top view)
Guide pin
Knob A
Knob B
Exit trays
Screws D
Tray 3
Pawl
Pawl
Pawl
1
2
1
2
3
2 – 4
Click on the first or last page to see other AR-FN1 (serv.man3) service manuals if exist.