AR-F13 (serv.man2). AR-F13 Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 39

Read Sharp AR-F13 (serv.man2) Service Manual online

AR-F13 DISASSEMBLY AND ASSEMBLY 5-8
(7)Removing the Staple/Fold Drive Unit
1) Open the front door [1], and slide out the stapler unit [2] slightly to the
front.
2) Remove the screw [3], and detach the interface retainer [4].
3) Free the six harness retainers [5], and disconnect the connector [6].
4) Free the harness [7] from the harness retainer [5].
5) Free the harness [7] from the edge saddle [8]; then, disconnect the
two connectors [9].
6) Release the harness retainer [10], and disconnect the connector
[11].
7) Free the harness [12] from the harness retainer [10].
8) Free the harness [12] for the edge saddle [13]; and disconnect the
two connectors [14].
9) Remove the screw [15], and free the claw [17] of the harness guide
from the long angle [16] of the base plate.
10) Disconnect the two connectors [18], and free the harness [20] from
the edge saddle [19].
11) Remove the three screws [21].
12) Remove the screw [22], and detach the staple/fold drive unit [23].
[1]
[2]
[6]
[7]
[3]
[7]
[8]
[9]
[7]
[5]
[5]
[4] [5] [7] [5]
[12]
[11]
[10]
[13]
[14]
[17]
[15]
[16]
[18]
[18]
[19]
[20]
[21]
[21]
[21]
[22]
[23]
Page of 64
Display

Click on the first or last page to see other AR-F13 (serv.man2) service manuals if exist.