Read Sharp AR-F13 (serv.man2) Service Manual online
AR-F13 DISASSEMBLY AND ASSEMBLY 5-4
5) Remove the timing belt [13].
6) Remove the E-ring [14] to remove the staple position check gear
6) Remove the E-ring [14] to remove the staple position check gear
[15].
7) Turn the gear [16] to align the round hole in the staple driver gear
with the round hole [17] at the back.
8) Insert a pin [18] with a diameter of approximately 2 mm
(use recommended) in the round hole to secure the gear.
9) Turn the gear [19] to align the round hole in the staple clincher cam
with the round hole [20] at the back.
10) Insert a pin [21] with a diameter of approximately 2 mm (use of a 2
mm Allen wrench is recommended) in the round hole to secure the
gear.
11) With the gears and cam fixed, install the timing belt [22] on gears
[23] and [24].
[14]
[15]
[13]
[16]
[17]
[18]
[19]
[20]
[21]
[23]
[24]
[22]
Click on the first or last page to see other AR-F13 (serv.man2) service manuals if exist.