Read Sharp AR-C330 (serv.man4) Service Manual online
AR-PE3/PX5 - 3 -
12) Remove the screws, and slide and remove the printer control-
ler cover.
13) Fix the three screws (M4 x 10) temporarily.
14) Engage the notch section in the lower side of the printer con-
troller with the temporarily fixed screws.
15) Pass the power connector, the HDD connector, and the con-
troller switch connector toward you through the printer control-
ler. Fix the printer controller by hooking with the power unit
hook.
ler. Fix the printer controller by hooking with the power unit
hook.
16) Connect each connector. Fix the printer controller with three
screws (M4 x 10).
∗
Connect the connectors to the power switch so that the blue
connector is connected toward you, and the white connector in
the opposite side.
connector is connected toward you, and the white connector in
the opposite side.
17) Slide the printer controller cover and fix it with the screws.
18) Connect the I/F cables to the printer controller. Fix two I/F
cables to the I/F fixing block with the snap band at three posi-
tions.
tions.
19) Install the removed parts to the original positions.
∗
When closing the scanner unit, check that the I/F cable is
engaged with the notch section.
engaged with the notch section.
Click on the first or last page to see other AR-C330 (serv.man4) service manuals if exist.